The Mellotron Group group photo

Yahoo Groups archive

The Mellotron Group

Index last updated: 2026-04-02 20:46 UTC

Thread

New Member - Introduction

New Member - Introduction

2011-11-09 by z z

Hey folks.

Jim Blair here. Been into Mellotrons for many years. Owned a few M400's, a 400SM, Chamberlin, Novatron Mk V, Optigans, etc. Probably played every Tron and Chamberlin model except a Mk 1. No stranger to the scene, but I've been out of the loop for a while.

I'm awaiting an M4000D from Markus, and am trying to "restore" an M400 from a bunch of spare parts that I've gathered over the years.

From being a part of vintage car restoration forums over the years, I've found that there are usually spare used parts to be bought and traded, if the community is willing. Does this network exist in the current Mellotron world? I have a good start on parts, some spares, but need many additional bits to bring another Mellotron into existence.

I will buy new parts when I can afford it, but this project is on a budget, so used is probably the realistic way to go, at least for the moment.

So, nice to meet you all, and I hope to chat soon.

Jim

Re: [newmellotrongroup] New Member - Introduction

2011-11-09 by Vance Pomeroy

Welcome Jim

Show quoted textHide quoted text
On 11/9/2011 12:20 AM, z z wrote:

Hey folks.

Jim Blair here. Been into Mellotrons for many years. Owned a few M400's, a 400SM, Chamberlin, Novatron Mk V, Optigans, etc. Probably played every Tron and Chamberlin model except a Mk 1. No stranger to the scene, but I've been out of the loop for a while.

I'm awaiting an M4000D from Markus, and am trying to "restore" an M400 from a bunch of spare parts that I've gathered over the years.

From being a part of vintage car restoration forums over the years, I've found that there are usually spare used parts to be bought and traded, if the community is willing. Does this network exist in the current Mellotron world? I have a good start on parts, some spares, but need many additional bits to bring another Mellotron into existence.

I will buy new parts when I can afford it, but this project is on a budget, so used is probably the realistic way to go, at least for the moment.

So, nice to meet you all, and I hope to chat soon.

Jim

Re: [newmellotrongroup] New Member - Introduction

2011-11-09 by Tony

Hi Jim,
You’re pretty much where you need to be then.
The only part that seems to be gone without question is the “sacred” on/off red cap!
The “chaps” at Streetly should cover the electrical, and mechanical needs. www.mellotronics.com
I’m sure other members will offer up other ideas, but from my nearly 40 yrs. of owning my M400, they’ve covered me just fine.
Best,
Tony #510
From: z z
Sent: Wednesday, November 09, 2011 12:20 AM
Subject: [newmellotrongroup] New Member - Introduction

Hey folks.

Jim Blair here. Been into Mellotrons for many years. Owned a few M400's, a 400SM, Chamberlin, Novatron Mk V, Optigans, etc. Probably played every Tron and Chamberlin model except a Mk 1. No stranger to the scene, but I've been out of the loop for a while.

I'm awaiting an M4000D from Markus, and am trying to "restore" an M400 from a bunch of spare parts that I've gathered over the years.

From being a part of vintage car restoration forums over the years, I've found that there are usually spare used parts to be bought and traded, if the community is willing. Does this network exist in the current Mellotron world? I have a good start on parts, some spares, but need many additional bits to bring another Mellotron into existence.

I will buy new parts when I can afford it, but this project is on a budget, so used is probably the realistic way to go, at least for the moment.

So, nice to meet you all, and I hope to chat soon.

Jim

Re: [newmellotrongroup] New Member - Introduction

2011-11-09 by Jim Blair

Thanks Tony,

The funny thing is, I have two of those caps!


Jim



At 09:19 AM 11/9/2011, you wrote:
Show quoted textHide quoted text


Hi Jim,


The only part that seems to be gone without question is the “sacred” on/off red cap!

Re: [newmellotrongroup] New Member - Introduction

2011-11-09 by Tony

Cool, tuck them away, they’re priceless to some, like me.
I have always guarded mine, and insured it too j/k.
Machine just isn’t complete without a perfect original control panel, and the red on/off cap .
Mine has both, clean living I guess.
Tony
From: Jim Blair
Sent: Wednesday, November 09, 2011 9:39 AM
Subject: Re: [newmellotrongroup] New Member - Introduction

Thanks Tony,

The funny thing is, I have two of those caps!


Jim



At 09:19 AM 11/9/2011, you wrote:



Hi Jim,


The only part that seems to be gone without question is the “sacred” on/off red cap!

Re: [newmellotrongroup] New Member - Introduction

2011-11-10 by Bruce Daily

Welcome to you, Jim!
-Bruce Daily
M400 #1221

Show quoted textHide quoted text
From: z z <ceratos@shaw.ca>
To: newmellotrongroup@yahoogroups.com
Sent: Wednesday, November 9, 2011 1:20 AM
Subject: [newmellotrongroup] New Member - Introduction

Hey folks.

Jim Blair here. Been into Mellotrons for many years. Owned a few M400's, a 400SM, Chamberlin, Novatron Mk V, Optigans, etc. Probably played every Tron and Chamberlin model except a Mk 1. No stranger to the scene, but I've been out of the loop for a while.

I'm awaiting an M4000D from Markus, and am trying to "restore" an M400 from a bunch of spare parts that I've gathered over the years.

From being a part of vintage car restoration forums over the years, I've found that there are usually spare used parts to be bought and traded, if the community is willing. Does this network exist in the current Mellotron world? I have a good start on parts, some spares, but need many additional bits to bring another Mellotron into existence.

I will buy new parts when I can afford it, but this project is on a budget, so used is probably the realistic way to go, at least for the moment.

So, nice to meet you all, and I hope to chat soon.

Jim