The Mellotron Group

Hi all-
  To clarify- The pedal I have is the Yamaha FC7 (not FY7).  Sorry for any confusion.
 
   -Bruce D.


--- On Mon, 3/29/10, lsf5275@aol.com <lsf5275@aol.com> wrote:


From: lsf5275@aol.com <lsf5275@aol.com>
Subject: Re: [newmellotrongroup] Re: volume pedal?
To: newmellotrongroup@yahoogroups.com
Date: Monday, March 29, 2010, 6:12 PM


  




Since the line out runs through the swell socket to the line out socket, you must have had a contact issue. in the swell pedal socket. Any loss in volume with a swell pedal plugged in would be a function of a faulty potentiometer in the pedal itself. 
 

In a message dated 3/29/2010 11:27:33 A.M. Eastern Daylight Time, MAinPsych@aol. com writes:
  



In a message dated 3/29/2010 4:50:47 A.M. Pacific Daylight Time, kornowicz@cox. net writes:
Is there any rewiring needed to use the Ernie Ball pedal in the volume pedal jack? I have one that I use with my guitars, but I'm using an FC7 with #500. I like the feel of the Ernie Ball better, but I thought it could only be used with the output jack.

Bernie

I experienced a loss of signal when using the pedal jack, much the same as when I had an ARP String Ensemble.  Has anyone else experienced this?  Since having the ARP, I always use the output jack with my trusty Ernie Ball 6166 -- nice long throw for swells.
 
Frank 1