The Mellotron Group

On 27 Jul 2017, at 08:40, Norm Leete NormLeete@aol.com [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:

Dear All,

Inside is a pair of L shaped slots that mate up with the switch so when you put the cap on you rotate it until there is a click when it locates...

Cheers,
Norm

Sent from my iPad

On 26 Jul 2017, at 15:23, Ben Stuyts yahoo@stuyts.nl [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:

I have just received some great close-up pictures from the outside (thanks, David!). But the inside is still a bit of a mystery to me.

Thanks,
Ben

On 26 Jul 2017, at 14:34, John Wright jwright911703@gmail.com [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:



The red lense in the photo looks pretty close to me.

On Wed, Jul 26, 2017 at 5:27 AM, John Barrick barrickjohn262@gmail.com [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:


Ben, the red lens cap screws onto the threads on the the switch.  If I can find mine (put it away for safe keeping), I can at least give you exterior dimensions.

On Wed, Jul 26, 2017 at 4:11 AM, Ben Stuyts yahoo@stuyts.nl [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:
[Attachment(s) from Ben Stuyts included below]

Hi John,

Any info is appreciated, thanks! I did a quick test print, and it looks like it might work. :) See attached photo.

If yours is broken, I’d be interested to have a photo of the inside. I have no idea how it actually was fixed on the switch. I see a little vertical slit, and then there’s sort of a round snap ring.

Ben


<UNADJUSTEDNONRAW_thumb_1a03.jpeg>

On 25 Jul 2017, at 23:40, John Hammaren hammaren@geoconcepts.com [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:



Hi,
I have had the same idea, but never got around to buying the printer yet. I will dig around for the pieces of mine that I think I saved for the exact purpose. Will forward info if I find something. In any case, please add me to the list. Rather than bust fingers turning on the switch I put it on a remote wall switch, but it would be nice to fix that issue. Thanks Ben
John

From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] 
Sent: Sunday, July 23, 2017 12:48 PM
To: newmellotrongroup@yahoogroups.com
Subject: [newmellotrongroup] 3d printed M400 power cap


Hi,

I have found this really nice transparant red filament for my 3D printer, so I thought I’d have a go at printing a cap for my M400’s power switch.

Problem is obviously that I do not have the original cap. I’d greatly appreciate it if somebody could supply me with some close-up photo’s and/or dimensions.

Best regards,
Ben

-- 
john barrick

*Leo got it right the first time*
*then he added a second pickup and got it righter*

------------------------------------
Posted by: Ben Stuyts <yahoo@stuyts.nl>
------------------------------------


------------------------------------

Yahoo Groups Links

------------------------------------
Posted by: Norm Leete <normleete@aol.com>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
   http://groups.yahoo.com/group/newmellotrongroup/

<*> Your email settings:
   Individual Email | Traditional

<*> To change settings online go to:
   http://groups.yahoo.com/group/newmellotrongroup/join
   (Yahoo! ID required)

<*> To change settings via email:
   newmellotrongroup-digest@yahoogroups.com 
   newmellotrongroup-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
   newmellotrongroup-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
   https://info.yahoo.com/legal/us/yahoo/utos/terms/