The Mellotron Group

Nope, but you're getting close. The clips are not required for the machine  
to operate correctly.
 
 
In a message dated 12/10/2010 1:13:59 P.M. Eastern Standard Time,  
pocotron@yahoo.com writes:

 
 
 
It would be much easier to put the headblock on if the W clips were  
installed first.
 
  -Bruce D.


--- On Fri, 12/10/10, Rick Blechta  <rick@rickblechta.com> wrote:



From:  Rick Blechta <rick@rickblechta.com>
Subject: Re:  [newmellotrongroup] Re: I goofed
To:  newmellotrongroup@yahoogroups.com
Date: Friday, December 10, 2010,  11:04 AM


 


On Dec 10, 2010, at 1:01 PM, _lsf5275@aol.com_ 
(http://us.mc636.mail.yahoo.com/mc/compose?to=lsf5275@aol.com)  wrote:


That's  why I suspected you were merely being lazy.  So find the  error. 
Hint: Something in the first picture is wrong. If you don't  look at a 400 a 
lot, you'll not likely see it. I'm sure Martin saw  it right away. It was not 
critical, but the machine could not work  correctly as is was.


Well, it certainly wouldn't produce much of a signal without the  headblock!