MOTM

I'm New to the list. just finished building all of
the modules currently available, and reading the
archives in the list.
Are all of the mods discussed previously being implemented
in the current run of modules? It seems they are,
at least on some of the units. The only one I had to add
was the noise/clock switch on the Sample & Hold
and the resistor from Q1 to the trigger jack on the
EG.
Also, Paul, are there any plans to build a keyboard
in the future?
Thanks,
Jim

A friend of mine will have built-up keyboards, BUT they are *as much* as a
Pro2000
and the CV out side not as accurate (12bits versus 16).
And then, you lose 2 MIDI sync'd LFOs and 9 memories.

I *strongly* recommend saving the $$$ and getting a Pro2000.

Paul S.
(BTW: the 2 mods you mention are valid. I will add the Vibrato select switch
to the panel
as an new thing when my current batch of panels run out)


-----Original Message-----
From: jimh54@... <jimh54@...>
To: motm@onelist.com <motm@onelist.com>
Date: Monday, June 07, 1999 9:37 AM
Subject: [motm] Modifications

>From: jimh54@...
>
>I'm New to the list. just finished building all of
>the modules currently available, and reading the
>archives in the list.
>Are all of the mods discussed previously being implemented
>in the current run of modules? It seems they are,
>at least on some of the units. The only one I had to add
>was the noise/clock switch on the Sample & Hold
>and the resistor from Q1 to the trigger jack on the
>EG.
>Also, Paul, are there any plans to build a keyboard
>in the future?
>Thanks,
>Jim
>
>------------------------------------------------------------------------
>Looking to expand your world?
>http://www.onelist.com
>ONElist has nearly 160,000 e-mail communities from which to chose!
>

> I'm New to the list.

Yeah! Another sole added to our motley crew.

> currently available, and reading the archives in the list.

What is the easiest way to access the archives?

> the units. The only one I had to add was the noise/clock switch
> on the Sample & Hold and the resistor from Q1 to the trigger jack
> on the EG.

Do the shipping S&Hs have this switch? Are the instructions in the
archives? Is this Paul approved?

Thanks,
Todd

> What is the easiest way to access the archives?
>

Go to http://www.onelist.com and log in, then there is a "Read Archives"
link or something like that. I use it when I'm away from the computer that I
receive email on.

Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@...

Welcome to the MOTM communicty Jim.
Larry Hendry

----------

> From: jimh54@...
> To: motm@onelist.com
> Subject: [motm] Modifications
> Date: Monday, June 07, 1999 9:36 AM
>
> From: jimh54@...
>
> I'm New to the list. just finished building all of
> the modules currently available, and reading the
> archives in the list.