MOTM

In fact, 3.7K turned out to be too low for me. Works good for syncing 4 at
once, but not so well for syncing just 2. So the higher value gets my vote
now also.

Wish I'd tried them out more thoroughly before I went and RTVed them to my
sync switches.

> >
> > Will look at Larry's 4.7K on the sync jack solution tomorrow.
> >
> > It appears this is the best solution.
>
>And, if I
> remember my
> last note from Dave, he was even happier with something in the 3.7K range
> (however the 4.7 is working just fine on mine. But, he is the guy with
> FOUR for testing. <grin>

Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@...

> From: "Dave Bradley" <daveb@...>
>
> In fact, 3.7K turned out to be too low for me. Works good for syncing 4

at

> once, but not so well for syncing just 2. So the higher value gets my

vote

> now also.
>
> Wish I'd tried them out more thoroughly before I went and RTVed them to

my

> sync switches.

OK Dave, You must now replace the two switches with the RTV to destroy all
evidence that there might have been even the smallest indescretion or error
for anyone to discover in the future.

Larry H <grin>