MOTM

Sorry, I was gone 3 days.

Will look at Larry's 4.7K on the sync jack solution tomorrow.

It appears this is the best solution. 

Paul S.

> From: "Paul Schreiber" <synth1@...>
> 
> Sorry, I was gone 3 days.
> 
> Will look at Larry's 4.7K on the sync jack solution tomorrow.
> 
> It appears this is the best solution. 

Err,,  Actually this is Dave B's solution.  I just picked the sync jack as
the location for my resistor.  I didn't do anything other than follow
directions from Dave on some testing and came to about the same conclusions
as did he.  The credit goes to Dave.  However, just like putting together
the kits, I can (normally) follow good instructions.  And, if I remember my
last note from Dave, he was even happier with something in the 3.7K range
(however the 4.7 is working just fine on mine.  But, he is the guy with
FOUR for testing. <grin>

Thanks

>From: "Paul Schreiber" <synth1@...>
>Reply-To: motm@onelist.com
>To: <motm@onelist.com>
>Subject: [motm] I'm back
>Date: Thu, 5 Aug 1999 17:35:05 -0500
>
>From: "Paul Schreiber" <synth1@...>
>
>Blast away.
>
>Paul S.
>
>
>
>--------------------------- ONElist Sponsor ----------------------------
>
>Create a list for FRIENDS & FAMILY...
>...and YOU can WIN $100 to Amazon.com.  For details, go to
>http://www.onelist.com/info/onereachsplash3.html
>
>------------------------------------------------------------------------
Welcome back,
Still waiting on filters if you still want me to build them. Hope you had a 
great time on VAC.
Jim

Blast away.

Paul S.

I'm back in Texas....raining cats & dogs!

Won't get much done until tomorrow afternoon, but in a nutshell:

if you have kits or modules on order (NOT the '101 or '820) I will *try like
hell* to ship
them out over the next 2 weeks.

IF you want to *order* something, GO AHEAD. Misery loves company. But they
will ship
with the rest.

Paul S.

Hi, I'm back

happy new year to everybody.

For me, the new year started very sad. My father-in-law passed
away last week, and we spent much our time since before Christmas in 
the hospital, and it was a very hard time. And there is still
so many things to do - not much time for soldering at the moment.

I'm slowly starting to answer mails from the mailing lists again
now - I see there are very interesting topics such as the violin /
cello thread and the gyrator stuff. And new interest in the
Quadra phaser, too. I think I have the Quadra stuff on my
newly organized web site (no more T-online), but some of the
links may not work properly; You might want to try uppercase /
lowercase versions of the links to get to the files - they should
all be there. (Start from my debitel homepage.)
The _discussion_ about the feedback loop inside a compander (as
in the Quadra phaser) should be on the Storm Tide Flanger page,
btw.

More later ...

JH.



-------------------------------------------------
debitel.net Webmail

I'm back.  My apologies for the delay in progress for panels and cabinets.
I will be back on both of those ASAP.  I hope to have panel prices posted
tomorrow and start taking orders immediately.

Over the last 3 weeks or so, I have seen my youngest so change from 4th year
med student to MD graduate. Guess I have to start calling him "Doc."
Tonight, I saw him turn from single guy to married man.  In a couple of
weeks we move him to Buffalo, New York to start his emergency room
residency.  We have also been preparing his house for sale and I have been
working some 12 and 16 hour days at my real job.  So, it has been hectic
around here.  But, things are finally looking like they may be headed toward
normal again.

I appreciate everyone's patience.  Cabinets are being built.  All the panel
metal is cut and painted and ready to delivery to the printer.  So, we are
still on schedule for a mid July delivery date.   Once we finalize orders
and collect payment, the printer will be ready to start immediately.

Later,
Larry

I'm back home after 16 days on and off the road.  We accumulated 2722 miles
on the Harley and got wet only a few times.  It was great to meet up with
Richard and his wife. We road all of the Skyline and Blue Ridge Parkways.  I
took the Harley to the highest point in the USA East of the Mississippi
River.  And, I sat on the back porch of my lodge hotel room at 5000 feet
elevation and looked "down" on the tops of a lot of clouds.

It will take me a couple of days to get caught up on e-mail and back up to
speed on the panel progress.  I'll also check in with the cabinet maker soon
and see how many more cabinets he finished while I was gone.  These things
are starting to stack up here.  I guess I better get some shipping boxes and
send some invoices.

Stooge Larry

Back in town following meaningful family experience.  Now, back to those
cables.
Larry

I'm back from, taming the dragon at Deal's gap with my Harley Davidson.

I'll get to e-mails as soon as I can.  Will resume sorting and packing
cables Tuesday.

Stooge Larry

Been gone for a bit, but back and will get to shipping next week. As usual, I 
have a lot to sort through. The MOTM-000 breadboards arrived today. I still have 
not sold enough to break even (cough cough).

Paul S.

On 2/15/07, Paul Schreiber <synth1@...> wrote:
> The MOTM-000 breadboards arrived today. I still have
> not sold enough to break even (cough cough).

As soon as I get my first order and use it up, I'll order some more...

;-) ;-) ;-)

Doug

http://www.stoogepanels.com
http://www.analognotes.com

Is this PCB 'again' only available as a one time offer? Or will they be 
kept in stock?
What about the other PCB's? (I hope this is a silly question.)
I'm planning to buy some after I complete at least 50% of my pile of 
PCB's ;-)
... and get my 320 working properly.

Cheers,
Tom

Paul Schreiber wrote:
>
> Been gone for a bit, but back and will get to shipping next week. As 
> usual, I
> have a lot to sort through. The MOTM-000 breadboards arrived today. I 
> still have
> not sold enough to break even (cough cough).
>
> Paul S.
>
> _










-- 
Tom Adam
The Big Ear
http://users.pandora.be/the-big-ear/
Check out the download section!

They are there forever.

What "other" PCBs?

Paul S.

----- Original Message ----- 

From: "Tom Adam" <tom.adam@...>
To: "Paul Schreiber" <synth1@...>; "MOTM - list" <motm@yahoogroups.com>
Sent: Friday, February 16, 2007 3:43 PM
Subject: Re: [motm] I'm back


> Is this PCB 'again' only available as a one time offer? Or will they be 
> kept in stock?
> What about the other PCB's? (I hope this is a silly question.)
> I'm planning to buy some after I complete at least 50% of my pile of 
> PCB's ;-)
> ... and get my 320 working properly.
> 
> Cheers,
> Tom
> 
> Paul Schreiber wrote:
>>
>> Been gone for a bit, but back and will get to shipping next week. As 
>> usual, I
>> have a lot to sort through. The MOTM-000 breadboards arrived today. I 
>> still have
>> not sold enough to break even (cough cough).
>>
>> Paul S.
>>
>> _
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -- 
> Tom Adam
> The Big Ear
> http://users.pandora.be/the-big-ear/
> Check out the download section!
> 
>