RE: [motm] Machine Screw This
2000-04-13 by Tkacs, Ken
These wouldn't be the ones Paul is currently using for the rack rails, but rather, something more like what I expect to be used for the cabinet rails.
Show quoted textHide quoted text
-----Original Message----- From: J. Larry Hendry [mailto:jlarryh@...] Sent: Thursday, 13 April, 2000 4:07 PM To: motm@egroups.com Subject: Re: [motm] Machine Screw This > From: Tkacs, Ken <ken.tkacs@...> > These guys have a nice search engine where > you specify the threads, diameter, head type, > length, finish, etc. ... and it comes up with a quote. > > They have black #8 32x1/4" pan heads, $10 for 1000, supposedly. > http://www.aaronsmachinescrews.com/ That would surprise me. I have not found the 8/32s that Paul uses in phillips head. However, they are common in hex or cap heads. Many stores have those in 4/40, 6/32, 8/32, and 10/32. I have usually found them to be around 49 cents each in singles.