MOTM

I was wondering if someone could explain how these work in terms of
sending CV based signals based on an X/Y plane. I have never used one
before but have heard of them and seen them on some older synths.
Thanks.

For modular use, a joystick would have 2 basic control voltage outputs. One
voltage would vary as you move the stick in the X plane, the other as you
move in the Y plane. You plug the cv outputs anywhere you want. Control
filter cutoff or resonance, oscillator pitch or pulse width, vca volume,
etc. - anything that can be voltage controlled. Some possible enhancements
to the basic functionality:

1. a pot to control the scaling
2. another pot to add a dc bias voltage (e.g., change whether your output
voltage goes from 0 - 10 volts or -5 to +5 volts)
3. inverting outputs so that you have a mirrored negative X and negative Y
cv available

Also, some joysticks are spring loaded return-to-center types, and some stay
where you place them. Both types are useful for different things, and
certain joysticks can switch the mechanical spring loading in and out.

Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@...

>
> From: kpeek1@...
>
> I was wondering if someone could explain how these work in terms of
> sending CV based signals based on an X/Y plane. I have never used one
> before but have heard of them and seen them on some older synths.
> Thanks.
>

How about a MOTM module, called a Controller Module, or Manual Input 
Module, or ?, with a joystick or two, and a small ribbon controller or 
two?  It might also have a few CV control knobs.  It would output just 
CV's, to be used for any purpose.

Fred

I'm working on it.... :)

No ribbon controllers...those were all full custom jobs.

Paul S.

----- Original Message ----- 

From: Fred Becker <mach25@...>
To: <motm@onelist.com>
Sent: Saturday, March 25, 2000 2:54 PM
Subject: RE: [motm] joystick controllers (Module Idea)


> From: Fred Becker <mach25@...>
> 
> How about a MOTM module, called a Controller Module, or Manual Input 
> Module, or ?, with a joystick or two, and a small ribbon controller or 
> two?  It might also have a few CV control knobs.  It would output just 
> CV's, to be used for any purpose.
> 
> Fred
> 
> ------------------------------------------------------------------------
> MAXIMIZE YOUR CARD, MINIMIZE YOUR RATE!
> Get a NextCard Visa, in 30 seconds!  Get rates as low as 
> 0.0% Intro or 9.9% Fixed APR and no hidden fees.
> Apply NOW!
> http://click.egroups.com/1/2122/3/_/529958/_/954017759/
> ------------------------------------------------------------------------
> 
>