MOTM

frank,

where did you get the white transfer lettering, and how did you apply it?

thanks
mark

At 11:40 AM 3/21/00 +0000, you wrote:

>Message: 17
>    Date: Mon, 20 Mar 2000 22:05:59 -0500
>    From: Frank Vanaman <fvanaman@...>
>Subject: Re: Dead (link to Frank's Page)
>
>Hi Paul & everyone
>
>For those of you who actually tried to visit my page, sorry about the
>ServerSneeze.
>
>It should be up now. Every so often it needs a little bonk on the head!
>
>http://216.254.67.249/projects.htm#MOTM
>
>Frank

Hi--

I got the lettering stuff from my local electronics store. No, I don't
mean Radio Shack!  In Baltimore, we still have Baynesville Electronics.
The letters come on the back side of a sheet of what looks like wax
paper, translucent. You position the carrier paper over the panel with
the letter in the right location and rub on the front side - preferably
with something small- about the size of a ball-point pen, like the back
end of a tiny paint brush. The letter adheres to the panel surface when
you pull the sheet up. Getting them to align well can be difficult if
you are not of steady hand! (er, go back and look at the picture!  ;-0 
)

If you don't have a local shop that sells such things, you  might want
to contact the manufacturer:

the product is
DRI-TRANSFER LETTERING, MarKit Jr.

from 
Russell Industries, Inc.
3000 Lawson Blvd.
Oceanside, NY 11572


Hope this helps...

Frank


mark scetta wrote:

> 
> From: mark scetta <n0nspaz@...>
> 
> frank,
> 
> where did you get the white transfer lettering, and how did you apply it?
> 
> thanks
> mark
>