MOTM

What exact cap type do I need for the "stacked-film" types (.22uf & .33uf)? There are yellow box metal film caps listed separately so I'm guessing not those but I'm not sure what then.

Thanks.

These are from Digikey:

0.22M = P4667-ND

0.33M = P4669-ND

The first place to check for full MOTM bill of materials:

www.dragonflyalley.com

Paul S.

----- Original Message -----
From: "joshdaigleusa" <taviny@...>
To: <motm@yahoogroups.com>
Sent: Friday, April 09, 2010 5:06 PM
Subject: [motm] stacked-film caps for MOTM-410?


> What exact cap type do I need for the "stacked-film" types (.22uf &
> .33uf)? There are yellow box metal film caps listed separately so I'm
> guessing not those but I'm not sure what then.
>
> Thanks.
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Thanks. Did check Bill & Will's site first but looks like they built their 410 from one of your parts kits, so they didn't have a BOM for this.

> From: synth1@...
> To: motm@yahoogroups.com; taviny@...
> Subject: Re: [motm] stacked-film caps for MOTM-410?
> Date: Fri, 9 Apr 2010 22:39:52 -0500
>
> These are from Digikey:
>
> 0.22M = P4667-ND
>
> 0.33M = P4669-ND
>
> The first place to check for full MOTM bill of materials:
>
> www.dragonflyalley.com
>
> Paul S.
>
>
>
> ----- Original Message -----
> From: "joshdaigleusa" <taviny@...>
> To: <motm@yahoogroups.com>
> Sent: Friday, April 09, 2010 5:06 PM
> Subject: [motm] stacked-film caps for MOTM-410?
>
>
> > What exact cap type do I need for the "stacked-film" types (.22uf &
> > .33uf)? There are yellow box metal film caps listed separately so I'm
> > guessing not those but I'm not sure what then.
> >
> > Thanks.
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> > <*> To visit your group on the web, go to:
> > http://groups.yahoo.com/group/motm/
> >
> > <*> Your email settings:
> > Individual Email | Traditional
> >
> > <*> To change settings online go to:
> > http://groups.yahoo.com/group/motm/join
> > (Yahoo! ID required)
> >
> > <*> To change settings via email:
> > motm-digest@yahoogroups.com
> > motm-fullfeatured@yahoogroups.com
> >
> > <*> To unsubscribe from this group, send an email to:
> > motm-unsubscribe@yahoogroups.com
> >
> > <*> Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
>

The New Busy is not the old busy. Search, chat and e-mail from your inbox. Get started.

Paul -

Try http://www.dragonflyalley.com/synthModulesBillOfMaterials.htm

and more specifically,

http://www.dragonflyalley.com/boms/MOTM410BOM.xls

The exact part numbers and availability vary from time to time. When Will put these BOMs together, he checked and I double-checked all the parts. But by now things have changed:

- the 10uF electrolytics are obsolete... I'm pretty sure these will do fine: Mouser Part# 75-515D106M050JA6AE3 - and I believe the lead spacing is right.

Digikey has the .33uF Polyester Film Caps... but is out of the .22uF ones. But they're 50V, 5% with 7.5mm lead spacing - I'll bet this will work: Mouser# 539-167224J63A-F 63V, 5%, 7.5mm lead spacing. To make sure, ask Paul.

The yellow box caps can be tricky to find... currently, Mouser has the .047uF Part# 80-R82EC2470DQ60J but is out of the .1uF and .47uF. Digikey has them all if you don't mind your Yellow Box Caps being blue <g> - but then sometimes, as Jimmy would say, yellow is not so mellow - anyway.

I just double-checked the polystyrenes - Mouser has 'em.

Bill

--- In motm@yahoogroups.com, Paul Newman <taviny@...> wrote:
>
>
> Thanks. Did check Bill & Will's site first but looks like they built their 410 from one of your parts kits, so they didn't have a BOM for this.
>
> > From: synth1@...
> > To: motm@yahoogroups.com; taviny@...
> > Subject: Re: [motm] stacked-film caps for MOTM-410?
> > Date: Fri, 9 Apr 2010 22:39:52 -0500
> >
> > These are from Digikey:
> >
> > 0.22M = P4667-ND
> >
> > 0.33M = P4669-ND
> >
> > The first place to check for full MOTM bill of materials:
> >
> > www.dragonflyalley.com
> >
> > Paul S.
> >
> >
> >
> > ----- Original Message -----
> > From: "joshdaigleusa" <taviny@...>
> > To: <motm@yahoogroups.com>
> > Sent: Friday, April 09, 2010 5:06 PM
> > Subject: [motm] stacked-film caps for MOTM-410?
> >
> >
> > > What exact cap type do I need for the "stacked-film" types (.22uf &
> > > .33uf)? There are yellow box metal film caps listed separately so I'm
> > > guessing not those but I'm not sure what then.
> > >
> > > Thanks.
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
>
> _________________________________________________________________
> The New Busy is not the old busy. Search, chat and e-mail from your inbox.
> http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3
>