MOTM

Hey, since Paul is on spring vacation I hope the MOTM group doesn't
mind me asking this here. I'm going to create my own case, how deep
should the case be?

-- 
www.elanhickler.com

I built a 12" cabinet and I'm happy with it. Here are plans for a case  
I built:

http://www.jefflaity.com/gallery/motmcabinet

Depth is good enough that I can have power supplies behind the  
modules. Beware if you're going to build any non-MOTM modules  
(Catgirl, Yusynth, etc.) that these are deeper than MOTM modules.

On Mar 16, 2009, at 2:00 AM, Argitoth wrote:

> Hey, since Paul is on spring vacation I hope the MOTM group doesn't
> mind me asking this here. I'm going to create my own case, how deep
> should the case be?
>
> -- 
> www.elanhickler.com
>
>

Mine are 10" deep. I wouldn't go any shallower than that. Non-MOTM  
modules can be much deeper than official MOTM modules. I still have  
enough room to put power modules in the back, but just.

>
> Hey, since Paul is on spring vacation I hope the MOTM group doesn't
> mind me asking this here. I'm going to create my own case, how deep
> should the case be?
>

Ditto. Mine are also 10" deep.  Same opinion. - Dave
http://modularsynthesis.com/cabinet/cabinet.htm

--- In motm@yahoogroups.com, Scott Juskiw <scott@...> wrote:

>
> Mine are 10" deep. I wouldn't go any shallower than that. Non-MOTM
> modules can be much deeper than official MOTM modules. I still
> have enough room to put power modules in the back, but just.

Double Ditto. My cabs are 10" deep too. I'm using the same ones Richard
Brewster uses in his mobile rig. I have a combination of 12U tall and 10U
tall cabinets:
http://www.audiopile.net/products/Cases/RE_series_roadcases/RUE_Case_product
s_page.htm

Great prices and great people to deal with there!

John L Rice


-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
djbrow54
Sent: Monday, March 16, 2009 9:16 PM
To: motm@yahoogroups.com
Subject: [motm] Re: How deep should a case for MOTM modules be?

Ditto. Mine are also 10" deep.  Same opinion. - Dave
http://modularsynthesis.com/cabinet/cabinet.htm

--- In motm@yahoogroups.com, Scott Juskiw <scott@...> wrote:

>
> Mine are 10" deep. I wouldn't go any shallower than that. Non-MOTM
> modules can be much deeper than official MOTM modules. I still
> have enough room to put power modules in the back, but just.

Allied is selling Kester 331 Organic Solder for $25.56/1-lb spool in case
anyone is interested. They say it's an overstock sale. No such sale for the
No-clean...

(Allied #833-1455, Kester #24-6337-6401)

-Greg