MOTM

Right ... that's my hand-built modular system that I finished in 1998.

I'll consider offers starting at EUR 10k, but - frankly - expect to sell it 
for more.
The catch is that it must be picked up in Nuernberg, Germany.

It might be interesting for someone who wants to own a system that has only 
been built once, and has been my main instrument and working ground for 
trying out ideas before I started to contribute to MOTM and, later, to sell 
PCBs.
(It was finished in 1998.)

I haven't made any specific documentation for selling this yet. It's not 
urgent - I plan to wait for offers for a few months.
Meanwhile, there are those *old* pictures from the half-finished system, and 
a list of modules here:
http://jhaible.heim.at/tonline_stuff/hj_modul.html
(without enclosure)
and a blurry picture of the finished System in wooden enclosure here:
http://jhaible.heim.at/tonline_stuff/jh_studio_2.jpg
(above the OB-8. The Synthi Clone in the foreground is not part of it.)

Modules:
(1) Dual VCO (CEM3340-based, with thru-zero FM and various types of sync)
(2) Dual VC-ADSR (SSM2056-based)
(3) Variable-Slope 6-pole Phaser/Filter (based on two Electronotes ideas)
(4) SEM-filter with envelope (Oberheim's design + SSM2056)
(5) Vintage SSM VCF & VCA (SSM2040 + SSM2020; VC-Resonance)
(6) Interpolating Scanner (SSM2024-based crossfade over 8 VCAs)
(7) Audio Interface (2 Stereo input channels, 2 Stereo output channels)
(8) Dual VCA/Panner/X-Fader (SSM2024-based. Linear Gain controls, 
exponential Pan/X-fade controls)
(9) Ramp LFO Bank (5 Triangle LFO's + pseudo random)
(10) 2 x 8-Step Sequencer (very simple, with CD4017)
(11) Octave Filter Bank (EMS-clone)
(12) Quadrature (Sin/Cos) VCO/LFO + Komparator + Manual CV's
(13) Ringmodulator + Sample&Hold + 2 Mixers + VCA + Lag + Noise
(14) Manual Controls (A large joystick with X and Y output voltage as well 
as a quad VCA switchable from 4->1 mixer to 1->4 signal distributor, plus a 
manual switch 1p2t with zero position)
(15) Analogue Shift Register + 2-Stage Envelopes (x2) + Multiples 
(Influenced by similar Serge Modules)
(16) Morphing Programmer
(17) Resonant Envelope + VCA / Overdrive / Inverter + Voltage Controlled 
Clock Divider + VariLogic (switchable AND/NAND/OR/NOR/XOR/XNOR)
(18) Korg MS-20-Filter (HP+LP; with original Korg-35 IC's) + two mixers with 
2 normal and 1 VCA input each
(19) Dual Saw VCO (SEM-design), Portamento

JH.