MOTM

Does anyone have a simple but effective switch debounce circuit to use
to derive a nice trigger for an MOTM system?

Ivan

Simplest way is to use a cap and resistor, here are several references:

http://www.elexp.com/t_bounc.htm
http://www.bioinspired.com/users/ajg112/electronics/debounce.shtml
http://www.all-electric.com/schematic/debounce.htm

If you want to get fancier, here's what I use in my synth:

http://www.tellun.com/motm/diy/tln866/TLN-866.html

On 5-Dec-08, at 2:53 AM, Ivan wrote:

> Does anyone have a simple but effective switch debounce circuit to use
> to derive a nice trigger for an MOTM system?
>
> Ivan

Thanks Scott!

Paul - What circuit do you use for the gate switch on the motm-1800?

Ivan

I just programmed up an inexpensive AVR processor with debounce and a 
one-shot to create a gate and trigger from two switches. Schematics 
and source code is on the page.
http://modularsynthesis.com/modules/DJB-018/djb018.htm

Dave

--- In motm@yahoogroups.com, "Ivan" <ivancu@...> wrote:
>
> Does anyone have a simple but effective switch debounce circuit to 
use

> to derive a nice trigger for an MOTM system?
> 
> Ivan
>