MOTM

Okay- I need money-lost my job and apartment at end of Dec, so (sadly) here's what I've 
put up on Ebay:
MOTM-101 kit,
MOTM-120 kit, 
MOTM-190 kit, 
MOTM-190 Assembled, 
MOTM-300 Assembled, 
MOTM-320 kit, 
MOTM-410 Assembled, 
MOTM-420 kit, 
MOTM-440 kit, 
MOTM-800 kit, 
MOTM-800 Assembled, 
MOTM-820 kit, 
MOTM-820 kit, 
MOTM-850 kit, 
MOTM-850 kit, 
MOTM-300 panel+pcb+free stooge bracket, 
MOTM-300 panel+pcb+free stooge bracket, 
MOTM-900 Assembled, 
MOTM/Blacet StonZ incomplete kit, 
MOTM/Stooge cabinet mounting flat rails & screws, 
Stooge 4 pot. long brackets (3 at a time).
Thanks for the learning experience and best of luck to you all during these tough 
economic times.  -Kevin

I'm very sorry to hear about your job loss, Kevin! I hope things turn around
for you quickly!

John L Rice

-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
dragonflys_eye
Sent: Friday, November 21, 2008 8:43 PM
To: motm@yahoogroups.com
Subject: [motm] A whole bunch of MOTM modules on EBAY!

Okay- I need money-lost my job and apartment at end of Dec, so (sadly)
here's what I've 
put up on Ebay:
MOTM-101 kit,
MOTM-120 kit, 
MOTM-190 kit, 
MOTM-190 Assembled, 
MOTM-300 Assembled, 
MOTM-320 kit, 
MOTM-410 Assembled, 
MOTM-420 kit, 
MOTM-440 kit, 
MOTM-800 kit, 
MOTM-800 Assembled, 
MOTM-820 kit, 
MOTM-820 kit, 
MOTM-850 kit, 
MOTM-850 kit, 
MOTM-300 panel+pcb+free stooge bracket, 
MOTM-300 panel+pcb+free stooge bracket, 
MOTM-900 Assembled, 
MOTM/Blacet StonZ incomplete kit, 
MOTM/Stooge cabinet mounting flat rails & screws, 
Stooge 4 pot. long brackets (3 at a time).
Thanks for the learning experience and best of luck to you all during these
tough 
economic times.  -Kevin


------------------------------------

Yahoo! Groups Links

Hi, I have a ton of parts for the tellun corp neural agonizer. I have the panel made by bridechamber. both circuit boards from tellun corp.I also have the CEM3320. 2 brackets for the circuit boards and pretty much almost all the parts needed. I am missing a bunch of the 100k resistors. I must have used them for something else. I have all the other resistors. I have all the capacitors, most of the semiconductors. all of them except the vactrols. I only have 5 of the spectrol 149 pots and only 5 of the switchcraft jacks. no dip sockets. no alco knobs, dont have all the screws and spacers, no wire, no coax cable, no solder, no heat shrink.  I do have all the other parts needed as far as I could tell by looking at the parts list. 

I DO NOT have the reverb tanks. 

some pictures here: 
http://www.flickr.com/photos/softestthing/sets/72157609708338787/

I don't know how much all the parts cost or anything. I guess make me an offer off list.

thank you.
wes

Hi, you probably have 3 x ca3280 (Scott used to provide those with 
the boards)but there's no cem 3320 in the neural agonizer if I'm not 
missing something.
Enrico Dibennardo



--- In motm@yahoogroups.com, hearts + horses <Wes@...> wrote:
>
> Hi, I have a ton of parts for the tellun corp neural agonizer. I 
have the panel made by bridechamber. both circuit boards from tellun 
corp.I also have the CEM3320. 2 brackets for the circuit boards and 
pretty much almost all the parts needed. I am missing a bunch of the 
100k resistors. I must have used them for something else. I have all 
the other resistors. I have all the capacitors, most of the 
semiconductors. all of them except the vactrols. I only have 5 of 
the spectrol 149 pots and only 5 of the switchcraft jacks. no dip 
sockets. no alco knobs, dont have all the screws and spacers, no 
wire, no coax cable, no solder, no heat shrink.  I do have all the 
other parts needed as far as I could tell by looking at the parts 
list. 
> 
> I DO NOT have the reverb tanks. 
> 
> some pictures here: 
> http://www.flickr.com/photos/softestthing/sets/72157609708338787/
> 
> I don't know how much all the parts cost or anything. I guess make 
me an offer off list.

> 
> thank you.
> wes
>

you are correct. there are 3 3280's. the 3320 was for the filter which
I have sold. so I still have the parts for the neural agonizer. thanks for the correction Enrico!

wes

--- On Sun, 11/23/08, edibennardo <endiendi@...> wrote:
From: edibennardo <endiendi@...>
Subject: [motm] Re: FOR SALE: Tellun Neural agonizer
To: motm@yahoogroups.com
Date: Sunday, November 23, 2008, 2:50 AM










    
            Hi, you probably have 3 x ca3280 (Scott used to provide those with 

the boards)but there's no cem 3320 in the neural agonizer if I'm not 

missing something.

Enrico Dibennardo



--- In motm@yahoogroups. com, hearts + horses <Wes@...> wrote:

>

> Hi, I have a ton of parts for the tellun corp neural agonizer. I 

have the panel made by bridechamber. both circuit boards from tellun 

corp.I also have the CEM3320. 2 brackets for the circuit boards and 

pretty much almost all the parts needed. I am missing a bunch of the 

100k resistors. I must have used them for something else. I have all 

the other resistors. I have all the capacitors, most of the 

semiconductors. all of them except the vactrols. I only have 5 of 

the spectrol 149 pots and only 5 of the switchcraft jacks. no dip 

sockets. no alco knobs, dont have all the screws and spacers, no 

wire, no coax cable, no solder, no heat shrink.  I do have all the 

other parts needed as far as I could tell by looking at the parts 

list. 

> 

> I DO NOT have the reverb tanks. 

> 

> some pictures here: 

> http://www.flickr. com/photos/ softestthing/ sets/72157609708 338787/

> 

> I don't know how much all the parts cost or anything. I guess make 

me an offer off list.

> 

> thank you.

> wes

>