MOTM

Inspired by this thread on Muff's forum 
http://www.muffwiggler.com/forum/viewtopic.php?
t=1594&postdays=0&postorder=asc&start=15 I was toying with the idea of 
using different colored screws in the top two mounting holes of each 
module to better distinguish between similar looking modules that are 
side by side, especially in dark and or fast paced live enviroments.

I put the mockup picture in the photos section here in my folder.
 
I keep thinking about it and I want to try it and just need to know the 
thread size so I can shop around.  I haven't decided yet if I'll make 
all similar modules the same color or just do alternating black screws 
and one other color for every other module.

Thanks!

John L Rice

The front panel screws are #8-32 threads.

Paul S.

Thanks Paul! And Dave and Dave too! ;-)

John L Rice

-----Original Message-----
From: Paul Schreiber [mailto:synth1@...] 
Sent: Thursday, September 18, 2008 7:41 AM
To: motm@yahoogroups.com; JohnLeightonRice
Subject: Re: [motm] What is the thread size of the MOTM module mounting
screws, please?

The front panel screws are #8-32 threads.

Paul S.