MOTM

http://www.crystalfontz.com/products/2004d/CFAH2004DYTI_430.jpg


This style was 14 for 14 :) Everyone likes this style, which a relief
because it was the one I preferred.

Paul S.
great minds think alike

Wow that was quick...I didn't even see the poll...

I do like this design, although I am a sucker for blue Led's etc, so the blue style would have
been my favorite. Will you be offering upgrades for the Midi/CV module to use a similar style
at a later date?

--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@...> wrote:
>
> http://www.crystalfontz.com/products/2004d/CFAH2004DYTI_430.jpg
>
>
> This style was 14 for 14 :) Everyone likes this style, which a relief
> because it was the one I preferred.
>
> Paul S.
> great minds think alike
>

At 06:08 PM 3/17/2008 -0500, Paul Schreiber wrote:

>great minds think alike

So do sheep. ;)

At least it shouldn't be too difficult to purchase and install a blue LCD
that's more to my liking.

Jeffrey

> I do like this design, although I am a sucker for blue Led's etc, so the
> blue style would have
> been my favorite. Will you be offering upgrades for the Midi/CV module to
> use a similar style
> at a later date?

I haven't really thought about offering different MOTM-650 LCD modules (it
is also a CrystalFontz).

It's not that hard to "swap out" the same basic footprint, there are 14
connections to unsolder on a 2 x 7 header,
and 2 wires for powering the backlight. Takes ~ 20min.

Paul S.

I hope these Crystalfontz displays are more reliable than the ones used for the P3 sequencer. Lots of failures with those.

Ivan

If the MOTM-650 midi CV is anything to go by, the displays are good quality and will last
pretty well.. Mine has a fair few running hours under the hood, and so far all is well :-)

--- In motm@yahoogroups.com, ivancu@... wrote:
>
> I hope these Crystalfontz displays are more reliable than the ones used for the P3
sequencer. Lots of failures with those.
>
> Ivan
>

The P3 displays are/were PLED. Not sure what the problem was, but lots of failures out there.

Ivan


------Original Message------
From: Paul Schreiber
To: ivancu@...
To: motm@yahoogroups.com
Sent: Mar 19, 2008 5:35 AM
Subject: Re: [motm] Re: Poll already over, we have a winner!

>I hope these Crystalfontz displays are more reliable than the ones used for
>the P3 sequencer. Lots of failures with those.
>

I have seen 1 failure in ~ 120 displays.

Paul S.

----- Original Message -----

From: ivancu@...

To: motm@yahoogroups.com

Sent: Wednesday, March 19, 2008 1:26 PM

Subject: [motm] Re: Poll already over, we have a winner!

I hope these Crystalfontz displays are more reliable than the ones used for the P3 sequencer. Lots of failures with those.

Ivan