MOTM

> Has it been made public who bought Larry's synth? If so, who was it?

>
> >I have a couple of observations/questions...
> >
>
> Grabs Dr. Perrer, pulls up chair......
>
> > The MOTM-700 looks to be totally discontinued, except there is an
> > extra parts kit available for it. Is that correct?
> >
>
> I had more Exra Parts kits than pcbs/panels left over. Chances are, I
> will have
> more boards/panels made in a month or so.
> I will wait and see how things are going with the whole concept (so
> far, it's
> been OK but let's see if it dies an early and horrible death).
>
> I need to sell somewhere around 18 pc boards/panels/extra kits (all 3)
> in order
> to *break even*, and before the sale last year, in the
> previous 18 months I sold less than 10 of them. So, I am reluctant.
>
> > The MOTM-380, MOTM-850 and MOTM-890 have also been totally
> > discontinued it seems. But all are still listed on the main MOTM
> > pages. This might confuse new customers.
>
> That will be corrected *tomorrow*. Today was 'honey-do' day and my
> son's 14th
> birthday party.
>
> >
> > I could not find the MOTM-600 listed any where for ordering. Is it
> available?
> >
>
> No, I am going to move that and the Cloud Generator to another area of
> the site.
>
> > Quite a few of the descriptions on the order (catalog) page have been
> > truncated as indicated by ellipses. This is especially problematic
> > when extra parts are being listed out.
>
> Click on the specific item and you will go the the actual page with
> all of the
> text.
>
> >
> > WaveWarpers are not available assembled. Is this correct?
> >
>
> Not right now. Again, I have to decide if it is worth bringing back or
> not. It
> was not a big seller, either.
>
> > 3U blank panels are not available. Is this correct?
> >
>
> I sold like 10 in 4 years. I do have some *unpainted* ones I will
> ship. Email
> me.
>
> > Are there any rack rail end caps left from the Stooge supply for sale?
> > http://www.wiseguysynth.com/larry/rack_end_cap/cap-screen.jpg
> <http://www.wiseguysynth.com/larry/rack_end_cap/cap-screen.jpg>
> > http://www.wiseguysynth.com/larry/rack_end_cap/rack_end_cap.jpg
> <http://www.wiseguysynth.com/larry/rack_end_cap/rack_end_cap.jpg>
> > http://www.wiseguysynth.com/larry/rack_end_cap/end_cap_slot.jpg
> <http://www.wiseguysynth.com/larry/rack_end_cap/end_cap_slot.jpg>
> >
>
> I never made these. I can, but I don't have the CAD drawings/artwork.
>
> > Has it been made public who bought Larry's synth? If so, who was it?
>
> Has not been made public, to my knowledge.
>
> Paul S.
>
>
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.17.24/668 - Release Date: 2/4/2007 1:30 AM
>

On Feb 4, 2007, at 3:23 PM, Scott E. wrote:

> Paul,
>
> For my part, I would be interested in 2 sets of 700 panels, pcbs and
> extra parts kits. Unlikely to order a parts kit for the 700
> without the
> pcb though.
>
> Just ordered a set (ep, pcb and panel) for the 510 and may get a
> second.
>
> Scott
> ==================================================
> Paul Schreiber wrote:
>>
>>> I have a couple of observations/questions...
>>>
>>
>> Grabs Dr. Perrer, pulls up chair......
>>
>>> The MOTM-700 looks to be totally discontinued, except there is an
>>> extra parts kit available for it. Is that correct?
>>>
>>
>> I had more Exra Parts kits than pcbs/panels left over. Chances are, I
>> will have
>> more boards/panels made in a month or so.
>> I will wait and see how things are going with the whole concept (so
>> far, it's
>> been OK but let's see if it dies an early and horrible death).
>>
>> I need to sell somewhere around 18 pc boards/panels/extra kits
>> (all 3)
>> in order
>> to *break even*, and before the sale last year, in the
>> previous 18 months I sold less than 10 of them. So, I am reluctant.
>>
>>> The MOTM-380, MOTM-850 and MOTM-890 have also been totally
>>> discontinued it seems. But all are still listed on the main MOTM
>>> pages. This might confuse new customers.
>>
>> That will be corrected *tomorrow*. Today was 'honey-do' day and my
>> son's 14th
>> birthday party.
>>
>>>
>>> I could not find the MOTM-600 listed any where for ordering. Is it
>> available?
>>>
>>
>> No, I am going to move that and the Cloud Generator to another
>> area of
>> the site.
>>
>>> Quite a few of the descriptions on the order (catalog) page have
>>> been
>>> truncated as indicated by ellipses. This is especially problematic
>>> when extra parts are being listed out.
>>
>> Click on the specific item and you will go the the actual page with
>> all of the
>> text.
>>
>>>
>>> WaveWarpers are not available assembled. Is this correct?
>>>
>>
>> Not right now. Again, I have to decide if it is worth bringing
>> back or
>> not. It
>> was not a big seller, either.
>>
>>> 3U blank panels are not available. Is this correct?
>>>
>>
>> I sold like 10 in 4 years. I do have some *unpainted* ones I will
>> ship. Email
>> me.
>>
>>> Are there any rack rail end caps left from the Stooge supply for
>>> sale?
>>> http://www.wiseguysynth.com/larry/rack_end_cap/cap-screen.jpg
>> <http://www.wiseguysynth.com/larry/rack_end_cap/cap-screen.jpg>
>>> http://www.wiseguysynth.com/larry/rack_end_cap/rack_end_cap.jpg
>> <http://www.wiseguysynth.com/larry/rack_end_cap/rack_end_cap.jpg>
>>> http://www.wiseguysynth.com/larry/rack_end_cap/end_cap_slot.jpg
>> <http://www.wiseguysynth.com/larry/rack_end_cap/end_cap_slot.jpg>
>>>
>>
>> I never made these. I can, but I don't have the CAD drawings/artwork.
>>
>>> Has it been made public who bought Larry's synth? If so, who was it?
>>
>> Has not been made public, to my knowledge.
>>
>> Paul S.
>>
>>
>> ---------------------------------------------------------------------
>> ---
>>
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.432 / Virus Database: 268.17.24/668 - Release Date:
>> 2/4/2007 1:30 AM
>>
>
>
>
> Yahoo! Groups Links
>
>
>