MOTM

Hi all

Please excuse this post if it is out of place.

Some time back someone posted a project to put a delay circuit on a
power distribution board. I'm trying to track down that project. If
anyone has any information on it I'd appreciate it.

Thanks

Larry T.

I did one and posted it. Details at
http://www.modularsynthesis.com/modules/DJB-Power/djbpower.htm
It's worked great ever since I installed it. I've not had a power
supply latch up since.

Since then Ken Stone did one that appears on his page
http://www.cgs.synth.net/modules/cgs63_psd.html

If I were to do it again, I might just use an AVR processor for the
delay and use it to drive the relay directly. I'd need a +5 volt
regulator for the AVR so the parts count may end up being the same.


Dave

--- In motm@yahoogroups.com, "Larry T." <ltroth@...> wrote:
>
> Hi all
>
> Please excuse this post if it is out of place.
>
> Some time back someone posted a project to put a delay circuit on a
> power distribution board. I'm trying to track down that project.
If
> anyone has any information on it I'd appreciate it.
>
> Thanks
>
> Larry T.
>