MOTM

Some recent kits may have been shipped the PWR-20 power cables made with the red 
and white wires swapped.

1) the power cable will STILL WORK.

2) if you received incorrect ones, I will swap them for correct ones at no 
charge *if* you return them to me. The address is on the cover of every manual.

3) I have 300 correct ones that just arrived, these are shipping to Indiana 
tomorrow and will be placed into all kits shipping going forward.

On a positive note, all of the MOTM-510 rotary switch assemblies arrived, and 
are also shipping to Indiana tomorrow.

Sigh.........

Paul S.

Aye i toasted my .com 107 assuming the wires where all the same way when i rewired some connectors to fit .com.. silly me. I think its just a couple of 

Oh by the way thanks for the MOTM stuff it certainly exceeded my expectations- very nicely designed and fantastic quality and sound. I got gx1,EG,440, 190 and

At 11:12 PM 11/8/2006, Paul Schreiber wrote:
>Some recent kits may have been shipped the PWR-20 power cables made 
>with the red
>and white wires swapped.
>
>1) the power cable will STILL WORK.
>
>2) if you received incorrect ones, ...

How would I *know* that the colors have been swapped? (I'm no expert 
on MOTM power cables. ;-)
--
john

>
> How would I *know* that the colors have been swapped? (I'm no expert
> on MOTM power cables. ;-)


The correct ones have the White wire as -15V (it's on the white silkscreen, by 
the power connector on the pc boards.

Again, it's just the *color* that is wrong, not the cable itself.

Paul S.