Synth-DIY Yahoo! Groups Archives

Thread

MOTM 510

2006-10-04 by Jeremy

Well, Just bit the bullet and ordered a 510 kit. 

As I understand we need to reach a minimum amount for Paul to produce
these - Hopefully that number will be reached!!

I'm sticking with MOTM no matter what the future holds, especially
with the audio engine designs just around the corner. 


Jeremy K. - Australia.

Re: [motm] MOTM 510

2006-10-04 by James Elliott

So
did I. Even though I could only find ONE sample on the synthtech
webpage and only ONE sample in the files section for this group and
only ONE sample on some forum I found via google (I'm sure there are
more out there, but I had to stop looking at some point). The last
sample I heard was really cool. As someone stated before sales would
probably be boosted if there were more samples READILY available. For
those of you who actually have this unit, if you really want to help
Paul out, POST some samples, don't just say - you'll find them in this
group if you look. Well, I spent quite a bit of time looking and I
didn't find any (Yahoo Groups Search Function SUCKS). 

 

Hopefully these kits actually ship.

*sorry jeremy :)

Show quoted textHide quoted text

----- Original Message ----
From: Jeremy <jdkirk@...>
To: motm@yahoogroups.com
Sent: Tuesday, October 3, 2006 8:58:07 PM
Subject: [motm] MOTM 510









  


    
            Well, Just bit the bullet and ordered a 510 kit. 



As I understand we need to reach a minimum amount for Paul to produce

these - Hopefully that number will be reached!!



I'm sticking with MOTM no matter what the future holds, especially

with the audio engine designs just around the corner. 



Jeremy K. - Australia.





    
  

    
    




<!--

Re: [motm] MOTM 510

2006-10-04 by Paul Schreiber

Look here

www.synthtech.com/wavewarper

Paul S.

Show quoted textHide quoted text

----- Original Message -----

From: James Elliott

To: motm@yahoogroups.com

Sent: Wednesday, October 04, 2006 6:26 PM

Subject: Re: [motm] MOTM 510

So did I. Even though I could only find ONE sample on the synthtech webpage and only ONE sample in the files section for this group and only ONE sample on some forum I found via google (I'm sure there are more out there, but I had to stop looking at some point). The last sample I heard was really cool. As someone stated before sales would probably be boosted if there were more samples READILY available. For those of you who actually have this unit, if you really want to help Paul out, POST some samples, don't just say - you'll find them in this group if you look. Well, I spent quite a bit of time looking and I didn't find any (Yahoo Groups Search Function SUCKS).

Hopefully these kits actually ship.

*sorry jeremy :)

----- Original Message ----
From: Jeremy To: motm@yahoogroups.com
Sent: Tuesday, October 3, 2006 8:58:07 PM
Subject: [motm] MOTM 510

Well, Just bit the bullet and ordered a 510 kit.

As I understand we need to reach a minimum amount for Paul to produce
these - Hopefully that number will be reached!!

I'm sticking with MOTM no matter what the future holds, especially
with the audio engine designs just around the corner.

Jeremy K. - Australia.

Ahh yes, now that's what I'm talkin about! Wow, I always thought the Zvex Fuzzfactory held the throne on the most gut wrenching distortion for guitars! I'll have to see if I can get some of my Guitar fiend buddies to jump on the wagon to get this deal above the minimum, but in the meantime I'll be adding one to the list here in just a bit when things slow down for lunch.
Ti_

Oh yea, and Paul, I seem to remember you saying something along the lines of the super expensive chip in these bad boys are used in satellites and plated in gold or something like that? Thats definately something to brag about to my boutique pedal friends, even though its' not actually a stomp box...

Paul Schreiber wrote:

Look here

www.synthtech.com/wavewarper

Paul S.

----- Original Message -----

Show quoted textHide quoted text

From: James Elliott

To: motm@yahoogroups.com

Sent: Wednesday, October 04, 2006 6:26 PM

Subject: Re: [motm] MOTM 510

So did I. Even though I could only find ONE sample on the synthtech webpage and only ONE sample in the files section for this group and only ONE sample on some forum I found via google (I'm sure there are more out there, but I had to stop looking at some point). The last sample I heard was really cool. As someone stated before sales would probably be boosted if there were more samples READILY available. For those of you who actually have this unit, if you really want to help Paul out, POST some samples, don't just say - you'll find them in this group if you look. Well, I spent quite a bit of time looking and I didn't find any (Yahoo Groups Search Function SUCKS).

Hopefully these kits actually ship.

*sorry jeremy :)

----- Original Message ----
From: Jeremy com.au>
To: motm@yahoogroups.com
Sent: Tuesday, October 3, 2006 8:58:07 PM
Subject: [motm] MOTM 510

Well, Just bit the bullet and ordered a 510 kit.

As I understand we need to reach a minimum amount for Paul to produce
these - Hopefully that number will be reached!!

I'm sticking with MOTM no matter what the future holds, especially
with the audio engine designs just around the corner.

Jeremy K. - Australia.

All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.