MOTM

It took a little longer than expected, but so worth the wait :)
  http://www.flickr.com/photos/mikest/169868252/
   (full set: http://www.flickr.com/photos/mikest/tags/rack/ )

60 hours of woodworking, 5 hours of welding, 10 hours of machining, and 
lord knowns how many hours of soldering later it's 'very close' to being 
done ;)

And as soon as my 650 shows up I can get down to some serious sequencing 
businuess. Yay!

--mikes

That is one hell of a good looking rack.

I don't get to say that that often.  :)

-George

----- Original Message ----- 

From: "Mike Estee" <squeeker@...>
To: "MOTM List" <motm@yahoogroups.com>
Sent: Sunday, June 18, 2006 5:24 PM
Subject: [motm] finally finished the rack frame...


> 
> It took a little longer than expected, but so worth the wait :)
>   http://www.flickr.com/photos/mikest/169868252/
>    (full set: http://www.flickr.com/photos/mikest/tags/rack/ )
> 
> 60 hours of woodworking, 5 hours of welding, 10 hours of machining, and 
> lord knowns how many hours of soldering later it's 'very close' to being 
> done ;)
> 
> And as soon as my 650 shows up I can get down to some serious sequencing 
> businuess. Yay!
> 
> --mikes

Stunning work and truly elegant!

>It took a little longer than expected, but so worth the wait :)
>   http://www.flickr.com/photos/mikest/169868252/
>    (full set: http://www.flickr.com/photos/mikest/tags/rack/ )

Wow, that is beautiful, a fantastic looking synth. That's a real work 
of art you've got there Mike. Way to go.

WOW!!!  That's some beautiful wood!  Great piece!

Chub

--- In motm@yahoogroups.com, Mike Estee <squeeker@...> wrote:
>
> 
> It took a little longer than expected, but so worth the wait :)
>   http://www.flickr.com/photos/mikest/169868252/
>    (full set: http://www.flickr.com/photos/mikest/tags/rack/ )
> 
> 60 hours of woodworking, 5 hours of welding, 10 hours of machining, 
and 
> lord knowns how many hours of soldering later it's 'very close' to 
being 
> done ;)
> 
> And as soon as my 650 shows up I can get down to some serious 
sequencing 

> businuess. Yay!
> 
> --mikes
>

I've posted some details about another utility module that I've 
completed. This is Harry Bissell's MorphLag circuit, adapted for MUUB 
PCBs (by putting it onto a piece of wood and banging a few nails 
through it). I actually built this a while ago but only managed to 
write up the user guide today:

http://www.tellun.com/motm/diy/tln862/TLN-862.html

Hope somebody else finds this useful. Apparently, Ken Stone is going 
to have a PCB for this circuit as well, but I wasn't able to find it 
on his website.