MOTM

The MOTM-800 Envelope Generator instructions say to solder the small 22ga 
(yellow) wire into the TRIG MOD hole.  The problem is at no point after that 
is it mentioned where to solder the other end.  Please let me/us know.  
Thanks.

-Elhardt

Page 11, 2nd paragraph. "Solder the wire in the TRIG MOD hole to the TOP lug
of
the TRIG jack."

Paul S.

----- Original Message -----
From: <Elhardt@...>
To: <motm@onelist.com>
Sent: Friday, November 26, 1999 2:13 PM
Subject: [motm] MOTM-800 Trig Mod Wire?


> From: Elhardt@...
>
> The MOTM-800 Envelope Generator instructions say to solder the small 22ga
> (yellow) wire into the TRIG MOD hole.  The problem is at no point after
that

> is it mentioned where to solder the other end.  Please let me/us know.
> Thanks.
>
> -Elhardt
>
> >