Yahoo Groups archive
Thread
2005-12-28 by Mike Marsh
OK, again probably not new. I'd like to see a envelope generator that will send a trigger when the envelope has finished its cycle. That way you could hook the trigger to the next EG whose done trigger would hook to the next EG whose trigger woulf hook to a note source for the next note. You could get 'delay' out that. Or if you hook the trigger outs creatively, something like an ASR, or even something really weird. That would be cool. Mike
2005-12-29 by Tony Karavidas
The UEG does that. http://www.encoreelectronics.com/UEGManual2.pdf (page 7) Tony
-----Original Message----- From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of Mike Marsh Sent: Wednesday, December 28, 2005 3:48 PM To: motm@yahoogroups.com Subject: [motm] Another New Module Idea OK, again probably not new. I'd like to see a envelope generator that will send a trigger when the envelope has finished its cycle. That way you could hook the trigger to the next EG whose done trigger would hook to the next EG whose trigger woulf hook to a note source for the next note. You could get 'delay' out that. Or if you hook the trigger outs creatively, something like an ASR, or even something really weird. That would be cool. Mike Yahoo! Groups Links
2005-12-29 by David Moylan
You could probably add this to an existing 800 by tapping the voltage which sets it into release and then using a comparator to measure the output voltage. When it's in release and the voltage = 0 fire a one shot. Alternately, just set a flip flop when the voltage goes positive and reset when it reaches 0 again. Then differentiate. Speaking of envelopes, will we ever see the MOTM envelope follower? I know it's not the most exciting module, but with Oakley's not available any more we don't have a default MOTM format envelope follower. Dave Mike Marsh wrote:
>OK, again probably not new. > >I'd like to see a envelope generator that will send a trigger when the >envelope has finished its cycle. That way you could hook the trigger >to the next EG whose done trigger would hook to the next EG whose >trigger woulf hook to a note source for the next note. You could get >'delay' out that. Or if you hook the trigger outs creatively, >something like an ASR, or even something really weird. > >That would be cool. > >Mike > > > > > > > > > > >Yahoo! Groups Links > > > > > > >
2005-12-29 by Richard Brewster
I'm waiting for the MOTM-810 VC EG, which has cycling features. Will it have an end-of-cycle output? For an envelope follower, if you have any type of Full Wave Rectifier try patching that to a MOTM-820 lag processor. Should work in a pinch. -Richard Brewster David Moylan wrote:
>You could probably add this to an existing 800 by tapping the voltage >which sets it into release and then using a comparator to measure the >output voltage. When it's in release and the voltage = 0 fire a one >shot. Alternately, just set a flip flop when the voltage goes positive >and reset when it reaches 0 again. Then differentiate. > >Speaking of envelopes, will we ever see the MOTM envelope follower? I >know it's not the most exciting module, but with Oakley's not available >any more we don't have a default MOTM format envelope follower. > >Dave > >Mike Marsh wrote: > > > >>OK, again probably not new. >> >>I'd like to see a envelope generator that will send a trigger when the >>envelope has finished its cycle. That way you could hook the trigger >>to the next EG whose done trigger would hook to the next EG whose >>trigger woulf hook to a note source for the next note. You could get >>'delay' out that. Or if you hook the trigger outs creatively, >>something like an ASR, or even something really weird. >> >>That would be cool. >> >>Mike >> >> >> >>
2005-12-29 by Mike Marsh
A comparator, huh? Hmmm...I have a couple of MUUBs...maybe I'll cook something up... --- In motm@yahoogroups.com, Richard Brewster <pugix@e...> wrote: > > I'm waiting for the MOTM-810 VC EG, which has cycling features. Will it > have an end-of-cycle output? > > For an envelope follower, if you have any type of Full Wave Rectifier > try patching that to a MOTM-820 lag processor. Should work in a pinch. > > -Richard Brewster > > David Moylan wrote: > > >You could probably add this to an existing 800 by tapping the voltage > >which sets it into release and then using a comparator to measure the > >output voltage. When it's in release and the voltage = 0 fire a one > >shot. Alternately, just set a flip flop when the voltage goes positive > >and reset when it reaches 0 again. Then differentiate. > > > >Speaking of envelopes, will we ever see the MOTM envelope follower? I > >know it's not the most exciting module, but with Oakley's not available
> >any more we don't have a default MOTM format envelope follower. > > > >Dave > > > >Mike Marsh wrote: > > > > > > > >>OK, again probably not new. > >> > >>I'd like to see a envelope generator that will send a trigger when the > >>envelope has finished its cycle. That way you could hook the trigger > >>to the next EG whose done trigger would hook to the next EG whose > >>trigger woulf hook to a note source for the next note. You could get > >>'delay' out that. Or if you hook the trigger outs creatively, > >>something like an ASR, or even something really weird. > >> > >>That would be cool. > >> > >>Mike > >> > >> > >> > >> >
2005-12-29 by coyoteous
Well being that "this newsgroup is more of a Keith Emerson kind of place" (I'm still trying to figure that one out, Dana*) and KE didn't need no stinkin' envelope followers! - I guess we don't need them either?! ;-) Seriously, I DO need envelope followers - so I guess it's Blacet , DotCom, etc. Anybody else want a MOTM envelope follower? *I have room in my heart for KE and JJP - 'The Happy Moog" and ELP were some of my first exposures to pop(?) electronic music. Good luck with your concert, Dana! Barry S. --- In motm@yahoogroups.com, Richard Brewster <pugix@e...> wrote:
> > I'm waiting for the MOTM-810 VC EG, which has cycling features. Will it > have an end-of-cycle output? > > For an envelope follower, if you have any type of Full Wave Rectifier > try patching that to a MOTM-820 lag processor. Should work in a pinch. > > -Richard Brewster > > David Moylan wrote: > > >You could probably add this to an existing 800 by tapping the voltage > >which sets it into release and then using a comparator to measure the > >output voltage. When it's in release and the voltage = 0 fire a one > >shot. Alternately, just set a flip flop when the voltage goes positive > >and reset when it reaches 0 again. Then differentiate. > > > >Speaking of envelopes, will we ever see the MOTM envelope follower? I > >know it's not the most exciting module, but with Oakley's not available > >any more we don't have a default MOTM format envelope follower. > > > >Dave > > > >Mike Marsh wrote: > > > > > > > >>OK, again probably not new. > >> > >>I'd like to see a envelope generator that will send a trigger when the > >>envelope has finished its cycle. That way you could hook the trigger > >>to the next EG whose done trigger would hook to the next EG whose > >>trigger woulf hook to a note source for the next note. You could get > >>'delay' out that. Or if you hook the trigger outs creatively, > >>something like an ASR, or even something really weird. > >> > >>That would be cool. > >> > >>Mike > >> > >> > >> > >> >
2005-12-29 by The Old Crow
If I can ever get the filter EG done, it has an "end of cycle" trigger. Crow /**/
On Wed, 28 Dec 2005, Mike Marsh wrote: > I'd like to see a envelope generator that will send a trigger when the > envelope has finished its cycle. That way you could hook the trigger
2005-12-29 by Scott Juskiw
>For an envelope follower, if you have any type of Full Wave Rectifier >try patching that to a MOTM-820 lag processor. Should work in a pinch. I have a MUUB circuit that does full wave rectification, and another that does lagging. Also, there is a MUUB comparator (or two) on the breadboard at this moment. These circuits will all be posted within the next few weeks as I get them finished.