Yahoo Groups archive
Thread
2005-11-09 by Miguel Mendoza
Hello, I'm finishing my first MOTM 490, wiring the input jacks I read on the manual that I have to solder a resistor wire to the beveled hole together with the braid in each. But I don't understand where I have to solder the other end of the resistor wire scrap, maybe in the top lug to make a bridge like with the MOTM 300? Maybe I don't have to solder it ? Please, any help? Thanks. Miguel.
2005-11-09 by Paul Schreiber
For the '490 *do not* solder the wire. Paul S.
----- Original Message -----
From: Miguel Mendoza
To: motm@yahoogroups.com
Sent: Wednesday, November 09, 2005 3:33 PM
Subject: [motm] MOTM 490
Hello, I'm finishing my first MOTM 490, wiring the input jacks I read on the manual that I have to solder a resistor wire to the beveled hole together with the braid in each. But I don't understand where I have to solder the other end of the resistor wire scrap, maybe in the top lug to make a bridge like with the MOTM 300? Maybe I don't have to solder it ?
Please, any help?
Thanks.
Miguel.
SPONSORED LINKS Label Cd music label Independent music label
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "motm" on the web.
b.. To unsubscribe from this group, send an email to:
motm-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------2005-11-09 by Miguel Mendoza
Thanks Paul, so I solder it only to the beveled lug and leave the other end free? Or I don't solder any resistor wire to anywhere? Thanks . Miguel.
----- Original Message -----
From: Paul Schreiber
To: motm@yahoogroups.com ; Miguel Mendoza
Sent: Wednesday, November 09, 2005 10:35 PM
Subject: Re: [motm] MOTM 490
For the '490 *do not* solder the wire.
Paul S.
----- Original Message -----
From: Miguel Mendoza
To: motm@yahoogroups.com
Sent: Wednesday, November 09, 2005 3:33 PM
Subject: [motm] MOTM 490
Hello, I'm finishing my first MOTM 490, wiring the input jacks I read on the manual that I have to solder a resistor wire to the beveled hole together with the braid in each. But I don't understand where I have to solder the other end of the resistor wire scrap, maybe in the top lug to make a bridge like with the MOTM 300? Maybe I don't have to solder it ?
Please, any help?
Thanks.
Miguel.
----------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "motm" on the web.
b.. To unsubscribe from this group, send an email to:
motm-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
----------------------------------------------------------------------------2005-11-09 by synth1@airmail.net
> Thanks Paul, so I solder it only to the beveled lug and leave the other > end free? Or I don't solder any resistor wire to anywhere? > Thanks . > Miguel. Do not solder a wire *anywhere*. Paul S.