MOTM

Hi All -

Just finished my 485. The demos show the 485 fed by two 310's, one
all SAW one all SQR. I attenuated the VCO outs a little using the
Oakley MultiMix. These go into the 485, as does an 800 into the FM
IN. The out goes to a 420, which is modified by an LFO into FM1.
Both samples show the 485 alone, then about half way through the 420
kicks in.

Paul, I'm sending you these separately.

Mike

On Sunday 07 August 2005 19:33, Mike Marsh wrote:

> Hi All -
>
> Just finished my 485. The demos show the 485 fed by two
> 310's, one all SAW one all SQR. I attenuated the VCO outs
> a little using the Oakley MultiMix. These go into the
> 485, as does an 800 into the FM IN. The out goes to a
> 420, which is modified by an LFO into FM1. Both samples
> show the 485 alone, then about half way through the 420
> kicks in.

Nice and gritty!

This shows how different the '485 HP and LP modes are
indeed. LP is much cleaner.

Did you do any other demos Mike? ;)

- Robert

I have a couple more, but I'm also working on a peice that is mostly
485. Stay tuned, probably finished this weekend...

Mike

--- In motm@yahoogroups.com, Robert van der Kamp <robnet@w...> wrote:
> On Sunday 07 August 2005 19:33, Mike Marsh wrote:
> > Hi All -
> >
> > Just finished my 485. The demos show the 485 fed by two
> > 310's, one all SAW one all SQR. I attenuated the VCO outs
> > a little using the Oakley MultiMix. These go into the
> > 485, as does an 800 into the FM IN. The out goes to a
> > 420, which is modified by an LFO into FM1. Both samples
> > show the 485 alone, then about half way through the 420
> > kicks in.
>
> Nice and gritty!
>
> This shows how different the '485 HP and LP modes are
> indeed. LP is much cleaner.
>
> Did you do any other demos Mike? ;)
>
> - Robert