MOTM

I'm going to convert my Blacet Binary Zone over to MOTM.  

Can someone who has also done this conversion suggest a 
push button for the "LAG" control?  A Mouser(or whoever) part 
number would be great too.

Thanks

Dave

Moe knows parts.

http://www.hotrodmotm.com/parts_list.htm

Moe


--- In motm@yahoogroups.com, "earthtodylan2000" <sir_dss@h...> wrote:

> I'm going to convert my Blacet Binary Zone over to MOTM.  
> 
> Can someone who has also done this conversion suggest a 
> push button for the "LAG" control?  A Mouser(or whoever) part 
> number would be great too.
> 
> Thanks
> 
> Dave

That was the one that Moe selected prior to Paul having any input in the
matter.  The current "official" button is the NKK SB4011NOH.  There was an
extended thread on this a year or two ago (CRS sufferer).

I just posted a couple of pics on the mailing list website.  They are in the
"pushbutton" folder.

The data sheet can be found here:  http://eu.switchzone.com/pdf/SB40.pdf.

The one listed here has a black plunger.  They are also available with red
plungers (NKK SB4011NOHC).

These buttons have optional caps in the following colors:

  AT422-2A  Black
  AT422-2B  White
  AT422-2C  Red
  AT422-2E  Yellow
  AT422-2F  Green
  AT422-2G  Blue

The hole diameter is 0.5", so it fits in the same hole as the one the Moe
specced.

--Shemp

> Moe knows parts.
> http://www.hotrodmotm.com/parts_list.htm
> Moe
> 
> > I'm going to convert my Blacet Binary Zone over to MOTM.  
> > 
> > Can someone who has also done this conversion suggest a 
> > push button for the "LAG" control?  A Mouser(or whoever) part 
> > number would be great too.
> > 
> > Thanks
> > Dave




		
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail