Yahoo Groups archive
Thread
2004-02-28 by Paul Schreiber
My latest batch of 2N3904 transistors has the center lead *slightly* offset from the 2 outside leads. The pc board pattern has them in a straight line. These will go into the board fine as-is, but the anal folks (you know who you are) may want to un-do the lead crimp by squeezing the lead with a pair of needlenose pliers first. Paul S>
2004-02-29 by Scott Juskiw
I've updated my "mods" page to include some recent changes. Most of these are simple LED modifications or daughterboard add ons. http://www.tellun.com/motm/mods/motm101/motm101.html http://www.tellun.com/motm/mods/motm120/motm120.html http://www.tellun.com/motm/mods/motm320/motm320.html http://www.tellun.com/motm/mods/motm800/motm800.html Also, check out the Frequency Shifter Special Edition: http://www.tellun.com/motm/mods/fs/fs.html
2004-02-29 by Tony Karavidas
Some people just can't wait to take things apart!! Looks nice Scott! Tony
> -----Original Message----- > From: Scott Juskiw [mailto:scott@...] > Sent: Saturday, February 28, 2004 4:02 PM > To: motm@yahoogroups.com > Subject: [motm] A few more mods > > I've updated my "mods" page to include some recent changes. > Most of these are simple LED modifications or daughterboard add ons. > > http://www.tellun.com/motm/mods/motm101/motm101.html > > http://www.tellun.com/motm/mods/motm120/motm120.html > > http://www.tellun.com/motm/mods/motm320/motm320.html > > http://www.tellun.com/motm/mods/motm800/motm800.html > > Also, check out the Frequency Shifter Special Edition: > > http://www.tellun.com/motm/mods/fs/fs.html > > > > > > > > > > Yahoo! Groups Links > > > > > > >
2004-02-29 by Richard Brewster
First, my compliments to Scott Jiskiw's web pages. Very nice! I have done most of those mods, too. Except I don't have any blue LEDs (yet). Now, as to taking things apart. I am more than halfway through retrofitting the first of my two Blacet Miniwaves for the 10-EPROM Hylander expander board. http://www.hylander.com/miniwave.html I went with the 10-position thumbwheel, because my Miniwaves are housed in custom $chaeffer panels. To save the panels I am just replacing the A/B EPROM toggle switch. I have become very intimate with my Dremel tool (and a lot of cardboard and masking tape). I removed all parts from the panel to cut hole for the switch, including the eight LEDs, which I replaced with nice green T1 Lumex panel mount units, Mouser 696-SSI-LXR1612GD, (not available in blue, Scott). You can find my Schaeffer panel design in the ModularSynthPanels group files, if you're interested. I am one of those oddballs who loves to build a synth almost as much as playing with it. I can hardly wait even to take my own things apart -- again! -Richard Brewster Tony Karavidas wrote:
>Some people just can't wait to take things apart!! > >Looks nice Scott! > > >Tony > > > > >>-----Original Message----- >>From: Scott Juskiw [mailto:scott@...] >>Sent: Saturday, February 28, 2004 4:02 PM >>To: motm@yahoogroups.com >>Subject: [motm] A few more mods >> >>I've updated my "mods" page to include some recent changes. >>Most of these are simple LED modifications or daughterboard add ons. >> >>http://www.tellun.com/motm/mods/motm101/motm101.html >> >>http://www.tellun.com/motm/mods/motm120/motm120.html >> >>http://www.tellun.com/motm/mods/motm320/motm320.html >> >>http://www.tellun.com/motm/mods/motm800/motm800.html >> >>Also, check out the Frequency Shifter Special Edition: >> >>http://www.tellun.com/motm/mods/fs/fs.html >> >> >> >> >> > >
2004-02-29 by Mark
On 2/28/04, Scott Juskiw put forth: >Also, check out the Frequency Shifter Special Edition: > >http://www.tellun.com/motm/mods/fs/fs.html Next December, I'll put up my pine tree modifications ;)
2004-03-01 by Mike Estee
I like the 800 mod. One feature I really wish the envelope had was a led follower for watching the envelop. --mikes
On Feb 28, 2004, at 4:02 PM, Scott Juskiw wrote: > I've updated my "mods" page to include some recent changes. Most of > these are simple LED modifications or daughterboard add ons. > > http://www.tellun.com/motm/mods/motm101/motm101.html > > http://www.tellun.com/motm/mods/motm120/motm120.html > > http://www.tellun.com/motm/mods/motm320/motm320.html > > http://www.tellun.com/motm/mods/motm800/motm800.html > > Also, check out the Frequency Shifter Special Edition: > > http://www.tellun.com/motm/mods/fs/fs.html > > > > > > > > > > Yahoo! Groups Links > > > > >
2004-03-01 by mate_stubb
Mike, Here's an easy way to do it if you are into a little DIY: http://www.hotrodmotm.com/800_mods.htm Moe --- In motm@yahoogroups.com, Mike Estee <mikest@a...> wrote: > I like the 800 mod. One feature I really wish the envelope had was a > led follower for watching the envelop. >
2004-03-02 by elle_webb
--- In motm@yahoogroups.com, "mate_stubb" <mate_stubb@y...> wrote: > Mike, > > Here's an easy way to do it if you are into a little DIY: > Is that sort of like being a little pregnant?