MOTM

For those who have not seen this.  We plan to sell Stooge panels.   Same is
true for the Wiard Noise Ring.  However, see my sent post on Stooge panels
before you rush out and order.
Larry


--- "Brice D. Hornback" <synthmodules@...> wrote:
> Hello everyone.  I've heard from a few of you that you are holding  off
ordering a PSIM-1 until it is available in MOTM format.  Well...  the more
orders I have now allows me to keep the costs down by ordering everything in
greater quantities.  Everyone benefits.  If you were to wait until the
panels are available (last I heard... some time in June at the earliest)...
I would be doing a small batch and the cost would be much higher than it is
now.  I am trying to keep costs down to save you money.  So... this is what
I've decided to do...

I will offer a built and tested PSIM-1 minus the panel, jacks, switches, and
wiring.  I've been working with Larry Hendry to provide the MOTM panels for
the PSIM-1.  The Stooge MOTM panel will include the pre-cutout hole for the
DB-9 serial connector so you won't have to worry about that.  Larry will
handle all sales and shipping of the MOTM format panels.  I will not be
providing a complete MOTM format PSIM-1 module now, or in the future.

I've added a new link on the PSIM-1 ordering page for the "Partial PSIM-1".
http://www.synthmodules.com/psim-1-order.htm

Thank you all for your interest and orders.

Best regards,
Brice D. Hornback
http://www.SynthModules.com

hello there,
sorry for public bandwidth - but others might want this also
larry - what is the post you sent to stooge panels re- the psim1..?
i really want one - and for some reason subscribing to the panels forum
weeks ago has resulted in absolutely no emails...

ps - frequency shifter turned up yesterday - unfortunately not only am i
working all weekend, but i have a remix to finish before monday...

cheers
paul b
sheffield
uk

----- Original Message -----
From: "J. Larry Hendry" <jlarryh@...>
To: "MOTM List" <motm@yahoogroups.com>
Sent: Friday, February 27, 2004 1:45 AM
Subject: [motm] PSIM-1 panel info


> For those who have not seen this.  We plan to sell Stooge panels.   Same
is
> true for the Wiard Noise Ring.  However, see my sent post on Stooge panels
> before you rush out and order.
> Larry
>
>
> --- "Brice D. Hornback" <synthmodules@...> wrote:
> > Hello everyone.  I've heard from a few of you that you are holding  off
> ordering a PSIM-1 until it is available in MOTM format.  Well...  the more
> orders I have now allows me to keep the costs down by ordering everything
in
> greater quantities.  Everyone benefits.  If you were to wait until the
> panels are available (last I heard... some time in June at the
earliest)...
> I would be doing a small batch and the cost would be much higher than it
is
> now.  I am trying to keep costs down to save you money.  So... this is
what
> I've decided to do...
>
> I will offer a built and tested PSIM-1 minus the panel, jacks, switches,
and
> wiring.  I've been working with Larry Hendry to provide the MOTM panels
for
> the PSIM-1.  The Stooge MOTM panel will include the pre-cutout hole for
the
> DB-9 serial connector so you won't have to worry about that.  Larry will
> handle all sales and shipping of the MOTM format panels.  I will not be
> providing a complete MOTM format PSIM-1 module now, or in the future.
>
> I've added a new link on the PSIM-1 ordering page for the "Partial
PSIM-1".

> http://www.synthmodules.com/psim-1-order.htm
>
> Thank you all for your interest and orders.
>
> Best regards,
> Brice D. Hornback
> http://www.SynthModules.com
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>