MOTM

What I did with the PPB. (Pauls Proto Board!)

1) 2 Lag Processors. (Based somewhere between the Thomas Henry & the
ASM-1 diagrams.)
2) 1 variable voltage source with 2 input mixer. Loosely adapted Henry
designs.
3) 12V+- Supply. (Simple.)
4) Doepfer LFO PCB holder! Sorry I needed an LFO... Now! PPB supply's
power & the Pot for speed control.
5) Extra sockets etc. installed for simple OPAMP tricks (TL082's I have a 
ton of these). (Inverters, Unity gain mixers,buffers etc.) None of which
are being used right now because I ran out of space on the 2 Space panel
it was mounted to.

I want get another PPB but I will be forced to buy another cabnet. 

Next Year...

Dave

Wow!  Thanks for sharing Dave.  Maybe we should have a place for schematics
and photos of MOTM format DIY stuff (except # 4 of course).

Tell us what you used for front panel labeling.
Larry

> From: Dave Fulton <dfulton@...>
> 
> What I did with the PPB. (Pauls Proto Board!)
> 
> 1) 2 Lag Processors. (Based somewhere between the
>    Thomas Henry & the ASM-1 diagrams.)
> 2) 1 variable voltage source with 2 input mixer. Loosely
>     adapted Henry designs.
> 3) 12V+- Supply. (Simple.)
> 4) Doepfer LFO PCB holder! Sorry I needed an LFO... Now!
>    PPB supply's power & the Pot for speed control.
> 5) Extra sockets etc. installed for simple OPAMP tricks
>     (TL082's I have a ton of these). (Inverters, Unity gain
>     mixers,buffers etc.) None of which are being used right
>     now because I ran out of space on the 2 Space panel
>     it was mounted to.
> 
> I want get another PPB but I will be forced to buy another cabnet. 
> 
> Next Year...
> 
> Dave