MOTM

Hmm... I just visited the panel page and no prices or links there....

Thanks,

Josue.

----- Original Message ----- 
From: "J. Larry Hendry" <jlarryh@...>
To: "MOTM List" <motm@yahoogroups.com>
Sent: Sunday, June 15, 2003 1:46 AM
Subject: [motm] Stooge panel prices posted - please read


> OK Gents,  If you visit the panel page at Wise Guy Synth, you will find
the
> GIF panel page has been updated with the current panel prices based on
what
> has been ordered so far.  I still have a few outstanding unanswered mails
to
> clarify orders.  So, some things may change ever so slightly.  Some prices
> may drop a little as Dave and I have not yet entered our orders.  They are
> rounded to the dollar for the estimates.  The actual price will be just as
> they were originally advertised.
>
> You will also notice that links have been added for the 320 and 120 info
> section to show the schematic and proposed add on PCB layouts.  Many
thanks
> to Scott Juskiw for doing this work.  I plan to give Scott the names of
> those who ordered 120 and 320 panels (unless you object) so he can plan to
> have PCBs available for you to go with your new panels.
>
> Feel free to e-mail me to add anything you wish to your order.  If you
were
> the only one to order and panel and therefore see the sky high price, you
> may cancel that order if you wish.
>
> I have extended the order deadline another day since some people may read
> only from work e-mail.  You now have today,  all day Sunday, and Monday
> until I get home from work to make any changes you wish.  Tuesday morning,
> this order goes off to the printer.
>
> Early next week, you can expect an e-mail invoice from me.  I am doing
> something I have not done before.  I am ordering the printing done before
I
> have payment.  So, please try to be prompt.  Drop me a note if there will
be
> a delay so I don't bug you about it.  No one likes a payment reminder
> notice. <snicker>
>
> For those of you that like facts and figures, the number of panels ordered
> is currently 320 and will probably be close to 340 or 350 before I am
> finished with it.  I am pleased to announce that my guess on the amount of
> metal needed was sufficient and there will be no problems filling
everyone's
> order.
>
> The most popular panel was the 320 with inverted outputs.  30 were
ordered.
> Second place went to the ever popular JLH-822 voltage switcher.
>
> Thanks to everyone for making this another successful Stooge panel order.
I
> expect delivery in late July.  Those ordering drilling service may be
early

> August as that percentage has gone up significantly.
>
> Larry
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Try now.  I cleaned out the directory and re-loaded the correct files.
Larry



----- Original Message -----
From: jwbarlow@...
Call me a Stooge, but I can't get the new GIF page with the prices. Anyone
else having that same problem?
JB

> ----- Original Message -----
> From: Mark <yahoogroups@...>
> I wouldn't do that, but I would have liked to see at least one other
person buy the Pro4 breakout panel!!  Afaik, Synthesis Technology used to
sell them.

--LH--
Yes.  Paul did.  I think a lot of people (like myself) could not stand the
price and purchased the very nice pro-2000 or Tony's
Encore Expressionist.

> Fewer people ordered CGS Dual ASR panels than I expected based on the
number of people who emailed me.  Still, enough people ordered them to
reduce the price significantly.

--LH--
That number is going up.  Some people held off on their panel orders until
the last minute (or maybe they were waiting for me to finally post prices).
So, many of the panel prices will actually be LOWER than the price posted at
my website.  None will be higher.

>  I will post a parts list

That would be most appreciated.

>  and Larry assures me that jack-only brackets are in the works.

Larry reports he will eventually get around to some kind of bracket to fit
the need.  How's that for evasive?

Larry Hendry (1/2 of Stooge Panels, Inc.).

On 6/16/03, J. Larry Hendry put forth:
>
>Yes.  Paul did.  I think a lot of people (like myself) could not stand the
>price and purchased the very nice pro-2000 or Tony's
>Encore Expressionist.

Well, I bought mine before there was MOTM or a Pro-2000.  At the 
time, I don't think I even knew about the Encore Expressionist. 
Also, a large part of the breakout panel is for the KADI outputs.

Speaking of Encore, any word on the Frequency Shifter??

>That number is going up.  Some people held off on their panel orders until
>the last minute (or maybe they were waiting for me to finally post prices).
>So, many of the panel prices will actually be LOWER than the price posted at
>my website.  None will be higher.

Excellent :)

>  >  I will post a parts list
>
>That would be most appreciated.

No problem :)  In order to list the best parts, I want to build it 
and test it first, and that testing will be much more accurate after 
I get three VCO's.

>  >  and Larry assures me that jack-only brackets are in the works.
>
>Larry reports he will eventually get around to some kind of bracket to fit
>the need.  How's that for evasive?
>

You could be more evasive  :)  Is there anything I can do to help?? 
I'd be willing to do it myself, except I know nothing about how to 
get brackets made.