MOTM

I ment to send this to the list.

JB?

That stuff below the TC to Event Box, MW2, MW2xt (The orange thing!) and
the Eventide 949is a custom panel with some
Serge PCB's & othe stuff. It goes like this,

In a 1 RU case...
1)Serge based APRC.(A voltage controlled crossfader.)
2)Inverter W/Voltage offset.
3)Voltage controlled Pulse Divider.(Serge Based)
4)Comparitor
5)Dual Analog Shift Registers (Serge based)
6)Banana to 1/8th & switched converters.
7)A nifty Green LED!

In 5 RU's
1)BLOG Serge based (Logic Functions)
2)Pulse Divider
3)Outputs from my JKJ CV-5 Midi to CV Box.
4)Analog CV & Gates from the MAQ16/3
5)Dual Audio mixers
6)Dual CV Mixers W/voltage offsets.

In 2 RU's
All kinds of tie lines to my mixers,Attenuattors, Banana to 1/4" RCA, CV
interface to the Eventide 949.

Farther over starts the Doepfer Modular. (Maq16/3 and 4 complete Doepfer
6RU Frames.)

I will post more picture of the entire studio.

The Serge stuff came out of 1/2 full early serge panels that I had.

Dave

Dave Fulton (08:33 AM 10/12/1999) wrote:

>That stuff below the TC to Event Box, MW2, MW2xt (The orange thing!) and
>the Eventide 949is a custom panel with some
>Serge PCB's & othe stuff. It goes like this,

Yeah, but what's that keyboard thing sitting to the right of the MOTM case?
Not that red Nord Lead thing, the other one...

I can't quite make it out...

:)


Mark

__________________________________________________
Check out the Waldorf Q: http://www.midiwall.com/q