Synth-DIY Yahoo! Groups Archives

Help: MOTM 120 kit

2003-01-16 by gion2archery <gion2archery@yahoo.com>

Help! 
I ami building the Motm 120 kit and I ran into a problem.
All of the other kits I have built on the instructions paul says to 
solder the VIA holes.  I am getting ready to mount the PC board 
and I realized that no where in the instructions have I read to 
solder the VIA holes???
I dont want to solder them in case they are not meant to be 
soldered????  I repread all of the instructions and see nothing 
about the VIA holes anywhere.  
Is there a typo??

Paul is at the NAM show.  

Has any of you built this kit? what do I do????

Thank you in advance

John

Re: [motm] Help: MOTM 120 kit

2003-01-16 by groovyshaman@snet.net

Go ahead and fill them in; use no-clean solder.

George

----- Original Message -----

Show quoted textHide quoted text

From: <gion2archery@...>
To: <motm@yahoogroups.com>
Sent: Thursday, January 16, 2003 2:02 PM
Subject: [motm] Help: MOTM 120 kit


> Help! 
> I ami building the Motm 120 kit and I ran into a problem.
> All of the other kits I have built on the instructions paul says to 
> solder the VIA holes.  I am getting ready to mount the PC board 
> and I realized that no where in the instructions have I read to 
> solder the VIA holes???
> I dont want to solder them in case they are not meant to be 
> soldered????  I repread all of the instructions and see nothing 
> about the VIA holes anywhere.  
> Is there a typo??
> 
> Paul is at the NAM show.  
> 
> Has any of you built this kit? what do I do????
> 
> Thank you in advance
> 
> John