MOTM

All I can add:

look at pictures of any SSL G-Series mixing console. If that's not confusing, I don't know what
is.

Engr #1: Boost the mid-teble +2 on channel #27
Tech#1: Where's my GPS receiver?

Paul S.

Sorry about the length of this: I'm running down a long and 
boring master (at least she's hitting some of the pitches - 
cringe). If you don't want to read a rambling account about some 
of my personal megamixer experience, please move ahead now.

Working a big console is really not that bad once you get used to 
it, since in most cases all of channel strips are the same (or at 
least similar). It's kind of like sitting in front of a giant 2D 
keyboard/sequencer (Godzilla's TKB?). Most of the time 
channels are laid out in groups of 8, which gives you your lateral 
position, you gotta think in pseudo-octal.

You need a really good rolling chair with a big SSL, though. You 
get to where you can fly from one end to the other and if you're 
working a lot of channels you can get a bit bruised up by the 
armrest. It's hell on your back and knees (even though you're 
sitting) - good sneakers are critical. The worst thing is a 
collision, I don't know if anyone's ever been seriously injured, but 
I've been knocked silly more than once.

As you're flying into position, your lead arm is outstretched 
heading for the section of the particular module you're after, then 
it's about eye to hand to hit the control as you're breaking with 
your lead foot - having pushed off with the other foot/leg and 
stabilizing your landing with the other arm and hand assisted by 
your belly (this is where your lower ribs can get a little bruised).
Then there are the two arm moves and the inevitable hitting your 
knees on rack gear (ouch!).

I haven't done this in over a decade, but it is such a visceral and 
athletic experience, I remember it like it was yesterday. I had 
barely average skills compared to some of the guys I've worked 
and hung out with. Coincidentally, I'm getting ready to help one of 
my old friends install a 72 channel Amek/Neve 9098 
(ChicagoTrax?) - it's a big boy! I think that only 8 were made. 
Rupert's supposedly coming up to "bless" it. It should be a lot of 
fun, as I haven't been around a "big board" in a long time.

Barry

--- In motm@y..., "Paul Schreiber" <synth1@a...> wrote:
> All I can add:
> 
> look at pictures of any SSL G-Series mixing console. If that's 
not confusing, I don't know what

> is.
> 
> Engr #1: Boost the mid-teble +2 on channel #27
> Tech#1: Where's my GPS receiver?
> 
> Paul S.

From: "Paul Schreiber" <synth1@...>

Subject: [motm] Sea of knobs
Date: Thu, 4 Apr 2002 22:22:47 -0600

Hi Paul,

> All I can add:
> 
> look at pictures of any SSL G-Series mixing console. If that's not
> confusing, I don't know what is.
> 
> Engr #1: Boost the mid-teble +2 on channel #27
> Tech#1: Where's my GPS receiver?

This is why certain people work well for the job, they not only knows
what to do, but they can actually find the bloody thing to do it on
without much help than the geography itself.

The large studio-consoles have their benefits, but to some degree it
starts to belong to the dinosaurs. I think that live-consoles will
enjoy a longer life thought.

Cheers,
Magnus

Maybe it'll be the next olympic event!

:)

Tony


> -----Original Message-----
> From: coyoteous [mailto:satori@...]
> Sent: Friday, April 05, 2002 12:14 AM
> To: motm@yahoogroups.com
> Subject: [motm] Re: Sea of knobs [OT]
> 

clip...

> I haven't done this in over a decade, but it is such a visceral and 
> athletic experience, I remember it like it was yesterday.