MOTM

Hi everyone,

I have an opportunity to buy a used Kenton Pro 2.  Two questions:

1.  Is this a good choice for controlling a MOTM modular (vs. the newer Pro
2000 or even a Pro Solo)

2.  This particular unit has a UK power cord.  Does anyone know if I would
simply need a plug adapter, or whether some internal changes would be
necessary to run at US current?

Thanks in advance,
David

hello all,

> I have an opportunity to buy a used Kenton Pro 2.  Two questions:
> 1.  Is this a good choice for controlling a MOTM modular (vs. the newer
Pro
> 2000 or even a Pro Solo)

we have a kenton pro two in the studio - it's very useful, i personally used
a Pro-Solo for conversion until i built the Oakley midi/cv convertor in MOTM
format

a secondhand Pro-2 goes for as low as \ufffd50 second hand here in the UK
the unit has an optional Hz/V card - check to see if this is fitted if
you're also wanting to control MS20s or whatever

> 2.  This particular unit has a UK power cord.  Does anyone know if I would
> simply need a plug adapter, or whether some internal changes would be
> necessary to run at US current?

erm, no idea without looking at it tomorrow
you could email kentons c/o www.kenton.co.uk they're pretty helpful chaps

cheers
paul b