MOTM

My case project is finally moving forward after a long series of 
delays, including the purchasing of a big bucks shop vacuum / air 
cleaning system (the helpful Lowe's tool guys had my wife convinced I 
was going to blow up the house with my sawdust).

I have all the pieces for 2 cases cut, and had my first successful 
experiment routing biscuits in a mitered joint.

Wanna see a pile of wood?

Look here<LOL>!
http://motm.retrosynth.com/moe_stuff/case_pics/case_parts_1.jpg

BTW, those aren't vertical stripes on the side pieces, they are 
another side piece behind the front one (two pairs of sides).

Moe

mate_stubb@... writes:

>>BTW, those aren't vertical stripes on the side pieces, they are another 
side piece behind the front one (two pairs of sides).<<

I thought to myself, why do you need two pairs of sides?  Then I realized 
they must be rib sections so you can also make your modular c-shaped when 
viewed from the top.  Or how about this, the modular is c-shaped vertically 
but o-shaped when viewed from above so that you sit with the modular totally 
circling around you.

-Elhardt

Er, no - just 2 separate complete cases...

Moe

--- In motm@y..., elhardt@a... wrote:
> I thought to myself, why do you need two pairs of sides?  Then I 
realized 
> they must be rib sections so you can also make your modular c-
shaped when 
> viewed from the top.  Or how about this, the modular is c-shaped 
vertically 
> but o-shaped when viewed from above so that you sit with the 
modular totally 

> circling around you.
> 
> -Elhardt