MOTM

I asked Paul this question a while back and he replied that you could take 
it up to 4.7M but anything above that would/could introduce drift.  Not 
having a 4.7M around at the time, and the guess that it would decrease the 
sensitivity to the point I would like, I dropped it.

-dave-

At 01:44 PM 1/1/01 -0500, you wrote:
>I just looked at the MOTM 300 schematic and was wondering if you (Larry)
>tried merely changing out R3 (a 3.32M resistor) to something like a 10M which
>would eliminate cutting the PCB trace?