MOTM

> Although if I had to pick
> between resistors on reel, or pre-bent resistor leads, I'd take the
> pre-bent
> leads if that is ever an option in the future.
>
> -Elhardt

Let's not get out of hand here, pre bent leads? If we have that happen,
there won't be much challenge left in building modules, we'll just have
to buy the assembled ones. Plus, if all the components are going to be
on the same "reel" this couldn't be done, the lead spacing is different
on the resistors, the axial capacitors and the ferrite beads. -Nate