MOTM

There has been discussion on and off about how to cause a visual division
when looking at the MOTM modules.  Some of us like that look because it
reminds us of the classic Moog appearance.  Some have said that such a
division line would help in lower lights to direct one to the right module
easier.

Paul suggested some of that thin stick-on chart tape.  I picked some up at
the local hobby shop today.  It is white, has a satin (no gloss) finish and
comes in a variety of widths.  I bought the 1/16 inch which was the most
narrow thay had.  I installed it down the right hand side of my MOTM-420. 
I must say that it really looks good and does quite a good job of making
the separation in panels VERY easy to see.

I got a roll big enough to do at least 100 MOTM modules for $1.97.  When I
installed it, I wrapped the ends of the tape over the ends of the module
face and around to the back so that when the modules are attached to a rack
rail or other case, the ends are securred and will not be prone to coming
unstuck.

Larry Hendry