MOTM

And, of course, we need to get the Beach Boys to use MOTM!!!

Paul S.

-----Original Message-----
From: J. Larry Hendry <jlarryh@...>
To: motm@onelist.com <motm@onelist.com>
Date: Sunday, June 20, 1999 3:01 PM
Subject: [motm] Alternate controllers for MOTM


>From: "J. Larry Hendry" <jlarryh@...>
>
>I will very soon be building an alternate controller for my MOTM system
>that can be used to accurately play Theremin style leads with my MOTM
>modules.  This controller will be available in kit form in the $100 or so
>range.  The guy who is producing the kit is the actual designer and builder
>of the Tannerin (named after its original designer) that Brian Wilson will
>be using on the upcoming Beach Boys tour.  The Tannerin (not the Theremin)
>is the instrument used to produce the Theremin like sounds of Good
>Vibrations.  The Tannerin is also easier to play as you actually slide a
>control across a flat surface that can be calibrated like a keyboard.
>Trust me, this method will be much easier that trying to reach out and grab
>those notes out of this air as required by the Theremin (been there, done
>that, own one, can't play it).
>
>I understand from Tom Polk (the kit designer) that the control voltage
>output will conform to the 1 volt / octave standard.  So, the audio output
>of the Tannerin could be used in addition to the control voltage output for
>integration into a MOTM patch.
>
>If anyone has any interest in this alternate controller, please send me
>e-mail privately.  If you have general questions you think the group might
>benefit from , please post them here.  Once I have my Tannerin kit built
>and working with my MOTM stuff, I will be certain to make a full report and
>some audio clips available to the list.
>
>Larry Hendry
>
>
>------------------------------------------------------------------------
>Where do some of the Internet's largest email lists reside?
>http://www.onelist.com
>At ONElist - the most scalable and reliable service on the Internet.
>