MOTM

> > From: "mark scetta" <n0nspaz@...>
> > can i use the motm 110
> > VCA/RM to boost a low input signal so that the other modules are

getting

> > enough signal?

> From: "Dave Bradley" <daveb@...>
> I've done this. It helps a little, but the gain is not nearly as high as

a

> preamp.
> Good luck, and welcome to MOTM!

Certainly another trick that helps (and does not tie up your VCA) is to run
your synth into a mixer and use the headphone output to feed the audio into
your MOTM. Many headphone amplifiers are capable of 10 V p-p.

Larry Hendry
(also a JP-6 owner and lover)