MOTM

Aha..... thanks for the explanations and ideas Ken & JB & Paul S.

A big cartoon-like light bulb has appeared above my head....

Chad.


On Tue, 20 Jun 2000 17:27:48 EDT jwbarlow@... writes:
> Damn! This patch won't work in the way I described since the 820 
> appears to 
> have no HOLD input (a gate input which holds the output constant 
> regardless 
> of the input). You'd have to have another S/H in front of the VC LAG 
> input in 
> order to keep the input from changing (and the output slowly 
> following that 
> input).
> 
> Now it's getting expensive!
> JB
> 
> In a message dated 6/20/2000 1:27:38 PM, jwbarlow@... writes:
> 
> >Now another idea for the 820 LAG PROCESSOR module:
> >1) Take a CV source to the input of the 820 (e.g., noise).
> >2) Take the 820 output to the input of the 100 (or 101) S/H. 
> >3) Take the 100 output to a CV input (say a 1v/oct of an 
> oscillator).
> >4) Set the lag time to be rather long (like say a 5 octave sweep in 
> thirty
> >
> >seconds).
> >5) Set the S/H level all the way up.
> >
> >This great patch (which I learned from the old Serge manual) keeps 
> step
> >size 
> >small but allows for a full 10V peak to peak swing for the total 
> voltage
> >
> >output over time. This means that (in the patch example given 
> above) any
> >two 
> >adjacent notes must be close together, but over time a full ten 
> octaves
> >would 
> >be covered. 
> 
>
------------------------------------------------------------------------
> Free Conference Calling with Firetalk!
> Host your next egroup meeting live on Firetalk.
> Click here!
> http://click.egroups.com/1/5478/5/_/529958/_/961536523/
>
------------------------------------------------------------------------
> 
>