MOTM

I thought the purists on the list would enjoy a quick pic of my MOTM
DarkStar. Over the weekend I received the first batch of panels back from my
silkscreener. The print quality is quite alot sharper than my crappy
digicamera shows. In fact, it looks just like a real MOTM module, except for
the two screw heads visible to hold the bracket (Paul, you should offer
blank panels WITH studs!!!)

Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@...

> -----Original Message-----
> From: John E Blacet [mailto:blacet@...]
> Sent: Thursday, June 15, 2000 9:36 AM
> To: motm@egroups.com
> Subject: [motm] Blacet-MOTM adaptor
>
>
> Hello MOTMites! ;)
>
> Some folks were interested in something like this:
>
> http://www.blacet.com/BlacetMOTMadap.gif
>
> This would allow you to place a Blacet module in the cutout and add up
> to 8 1/4" jacks on the bottom. There is a white SS over the jacks so you
> can presstype or mark the jack functions. They would look pretty much
> like a MOTM panel. I need to see some finish samples at the shop to make
> sure.
>