MOTM

According to the 180 spec sheet the power consumption is 40ma for the
+15V rail and 20ma for the -15V. The 6 pin din connector carries +/-15V,
Ground, Keyboard CV, Gate and Trigger. I plan to open mine up over the
weekend and see where the pinouts go. I also received a 6 pin din cable
with the keyboard and was thinking about cutting off one end and
connecting an AMP .156 connector like the ones used in MOTM. Or I may
just use a wallwart. The service manuals for the 100M series can be
found at  Music Machines: Roland System-100m  The links are not indexed
so you will have to open each until you find what you are looking for.
Hope this helps. Charles.

skinny bastard wrote:

> unless i'm mistaken, the 180 and 181 are powered by the special
> connector
> for the rest of the system... anyone know how difficult it wourld be
> to
> change this to a motm power connector, and if so, what would be the
> power
> consumption level (in terms of motm module equivelants)?
>
> _______________________________________________________________________
>
> Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com
>
> -----------------------------------------------------------------------
>
> -----------------------------------------------------------------------
>