Yahoo Groups archive

MOTM

Index last updated: 2026-04-14 00:02 UTC

Message

Re: [motm] Roland 100M Update

2000-05-31 by Charles Stella

One note: These keyboards have a din connector that supplied +/-15v from
the modular. So you must replace the jack or rig the supplied cable to
connect to your power supply or a wall wart.

Charles Stella wrote:

> I went down to Dr. Sound in Manhattan today and purchased a Roland 180
>
> keyboard for $190.00.  Thanks to Thomas for bringing them to light,
> and
> David for the excellent descriptions that made excellent studying on
> the
> subway downtown. This thing is dead mint and still in the box with the
>
> plastic wrapped around it. My space requirements make the 180 a better
>
> choice for me. They still have 6 or 7 of the 180's and 181's left. No
> 184's. Paul is still the king! The action is actually quite nice on
> these. Better than most new keyboards. Springs have a  good tension to
>
> them. If you get one of these, ask for one new in the box. There was
> one
> on the floor as a demo that was not nearly in such nice shape. Ask for
>
> Danny he was very helpful 212-334-5478. Refer to David's last posts
> for
> descriptions. Regards, Charles.
>
> -----------------------------------------------------------------------
>
> -----------------------------------------------------------------------
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.