MOTM

Hi Ivan,

I don't actually know this "pressure sensitive pouch film" you mention (more 
please?), but my main problem has been finding a WHITE lettering for such 
labels since most printers use the white = absence of any color (i.e., let 
the paper show through). I will check on the site you mention to see however, 
thanks. One other suggestion: drill your holes before you apply your label. 
I've ruined a few good labels by drilling into panels which I'd already 
applied labels to -- the chips came up and got between the panel and the 
label.

JB

In a message dated 4/12/2000 10:57:11 AM, ivancu@... writes:

>Another option is to use pressure sensitive pouch film to laminate graphics.
>You put a laser or ink-jet printed front panel graphic in the pouch and
>after 
>laminating (heating) you trim the graphic, remove the cover over the adhesive
>backing, and stick to your panel.  Drill out the holes and mount components
>and you are all set.

>While they don't have these specific items on their website, you can order
>a 
>catalog from this company that has all the products:

>http://www.usi-laminate.com