MOTM

>From: "Paul Schreiber" <synth1@...>
>
>It has come to my attention that the latest batch of PWR-20 cables shipped
>with
>each module were built by the manufacturer incorrectly. The insulation was
>stripped
>before crimping the wire to the connector. This may cause the wire to pull
>out of the
>connector. These have heat-shrink on them (the older ones used ty-wraps).
>
I've had this problem with 2 of my cables. If I fix them myself, as you
describe, will they be as stable as if you did them? Do I need any special
crimping tool?

Starting on the VCO tonight...

________________________________________________________
Dave Trenkel : improv@...  : www.peak.org/~improv/

"...there will come a day when you won't have to use
gasoline. You'd simply take a cassette and put it in
your car, let it run. You'd have to have the proper
type of music. Like you take two sticks, put 'em
together, make fire. You take some notes and rub 'em
together - dum, dum, dum, dum - fire, cosmic fire."
                                            -Sun Ra
________________________________________________________