MOTM

I vote for single space $99 kit.  However, as always, I will buy which ever
one you make.
Larry Hendry


----------
> From: Paul Schreiber <synth1@...>
> To: MOTM listserv <motm@onelist.com>
> Subject: [motm] Vote for VCLFO design!
> Date: Sunday, May 02, 1999 6:01 PM
> 
> From: "Paul Schreiber" <synth1@...>
> 
> On paper I have the VCLFO designed. *Curently*, it is designed to be a
1U,
> single VCLFO as follows:
> 
> 4 controls
> --------------
> 
> Initial Speed (from about 1 cylce in 20 seconds to 4Khz)
> CV Speed attenuator that is a reversing attenuator (ie increasing voltage
> makes it faster or slower than INITIAL)
> Shape: this is a symmetry control that effects all waveforms
simultaneously.
> At 12:00 then everything is 50%.
> Output select: 4 position rotary switch: Sine, Tri, Ramp, and Pulse
> 
> 4 Jacks
> -----------
> 
> CV Speed
> CV Shape
> OUT +
> OUT -
> 
> 1 LED: this is a special "analog" LED that continuously changes *colors*
at
> the LFO rate. It does not
> "blink": it's always on. This is because blinking can introduce curent
> glitches that a VCO can pickup
> (can you say "ASM-1").
> 
> Estimated price for this configuration: $99 kit $139 assembled.
> 
> However, I can make this a 2U wide as follows:
> 
> add a SHAPE attenuator (note that there is NOT on on the 1U)
> 4 individual outputs (like the VCO)
> 2 Speed CV inputs
> HI/LO range switch LO = 1 cycle in 1 minute to 900Hz HI as above
> 
> Estimate price for this configuration (everything else same: LED, etc) is
> $135 kit $190 assembled
> 
> Send in you vote/comments.
> 
> Paul S.
> 
> 
> 
> ------------------------------------------------------------------------
> Share the wealth!
> http://www.ONElist.com
> Tell a friend about ONElist's 130,000 free e-mail communities!