MOTM

So, in summary, this mishap makes no difference to the final product--it's
strictly a 'behind-the-scenes' thing, right?



-----Original Message-----
From: Paul Schreiber
To: MOTM listserv
Sent: 03/12/2000 12:31 AM
Subject: [motm] MOTM-440 info + pix

From: "Paul Schreiber" <synth1@...>

If you received the previous broadcast email, I discovered a misplaced
mounting hole
in the MOTM-440. The solution will be to add an additional hole in the
*mounting bracket*.

This hole will also be touching the existing mounting hole, but the KEPS
nut
will cover up
a large portion of it, so it will be barely noticeable.

When the first batch of pcbs run out, I will move the hole to it's
proper
location for all future
boards.

Sorry for getting too excited: I had visions of tossing all that work
for a
lousy hole!

Since this mounting hole is the less stressed of the 4, you can also
elect
to just leave it out.
This is what I did on my unit (see attached photo). It really doesn't
weaken
the mechanical
strength at all.

Tomorrow evening, I will add some demo snippets that Dave Bivins
thoughtfully recorded.

Paul S.


------------------------------------------------------------------------
GET A NEXTCARD VISA, in 30 seconds!  Get rates 
as low as 0.0% Intro APR and no hidden fees.
Apply NOW!
http://click.egroups.com/1/975/2/_/529958/_/952838993/
------------------------------------------------------------------------

 <<motm440.jpg>>