I got the E560 and E580 DIY boards, and
also FPE panels from Dave Brown's designs. I removed the switches
and pots today. I want to use the pot mounting holes to mount the
board to a bracket, so I don't have to drill holes in the corners
of the PCB. Maybe I didn't get all the solder out of the pot
mounting holes, because a 4-40 nylon screw doesn't quite fit
through. If I removed all the solder would they fit? Or if I
drilled them out to 1/8 inch, would that risk damaging the board?
Thanks,
Richard Brewster
http://pugix.com
Thanks,
Richard Brewster
http://pugix.com
On 7/17/14, 9:38 PM, davebr@... [motm] wrote:
I just finished up doing a 5U conversion of the E560 Deflector Shield. It's basically the same as my E580 conversion but I took some photos and built a web page for it. Most of the conversion details are on my 580 page. This is a very nice module!
560 page
http://modularsynthesis.com/motm/e560/e560.htm
580 page
http://modularsynthesis.com/motm/e580/e580.htm
Dave